Scheduled service maintenance on November 22


On Friday, November 22, 2024, between 06:00 CET and 18:00 CET, GIN services will undergo planned maintenance. Extended service interruptions should be expected. We will try to keep downtimes to a minimum, but recommend that users avoid critical tasks, large data uploads, or DOI requests during this time.

We apologize for any inconvenience.

#4 Fully functioning system, with proper documentation for others to use

Закриті
4 роки тому відкрито seharak · 4 коментарів
Keisuke Sehara відкоментовано 4 роки тому

Referee 1 (part 3 of 3)

In a revision I would expect the authors to provide links to acquisition code and analysis code so that this potentially could be repeated and benefit others. The text mentions requests can be made, but it is unlcear that is a fully functioning system with proper documentation for others to use.

I am writing documentation for the program, and try to re-organize its repository for the others to be useful.

Referee 1 (part 3 of 3) > In a revision I would expect the authors to provide links to acquisition code and analysis code so that this potentially could be repeated and benefit others. The text mentions requests can be made, but it is unlcear that is a fully functioning system with proper documentation for others to use. I am writing documentation for the program, and try to re-organize [its repository](https://gin.g-node.org/larkumlab/RealtimeDeepLabCut_PoseTrigger/src/dev) for the others to be useful.
julien colomb відкоментовано 4 роки тому
Власник

I think the reviewer is also thinking about documenting the hardware.

I think the reviewer is also thinking about documenting the hardware.
Keisuke Sehara відкоментовано 4 роки тому
Власник

All the hardware that we used is already described on the manuscript. I am also trying to describe hardware requirements in the documentation.

https://gin.g-node.org/larkumlab/RealtimeDeepLabCut_PoseTrigger/src/dev/README.adoc

All the hardware that we used is already described on the manuscript. I am also trying to describe hardware requirements in the documentation. https://gin.g-node.org/larkumlab/RealtimeDeepLabCut_PoseTrigger/src/dev/README.adoc
Keisuke Sehara відкоментовано 4 роки тому
Власник

Commit 8c051e9aa3 : added the libraries directory in the Pose-Trigger repository so that the users do not have to download/build/install from a number of repositories separately.

Documentation on installing these libraries are separated to its README

Commit https://gin.g-node.org/larkumlab/RealtimeDeepLabCut_PoseTrigger/commit/8c051e9aa39353c83569a003a459177b560eda48 : added the `libraries` directory in the Pose-Trigger repository so that the users do not have to download/build/install from a number of repositories separately. Documentation on installing these libraries are separated to [its README](https://gin.g-node.org/larkumlab/RealtimeDeepLabCut_PoseTrigger/src/dev/libraries/README.md)
Keisuke Sehara відкоментовано 3 роки тому
Власник

Now it is managed in the docs directory, using Sphinx.

Now it is managed in the [docs](https://gin.g-node.org/larkumlab/RealtimeDeepLabCut_PoseTrigger/src/master/docs) directory, using Sphinx.
Підпишіться щоб приєднатися до обговорення.
Етап відсутній
Немає відповідального
2 учасників
Завантажується...
Скасувати
Зберегти
Тут ще немає жодного вмісту.