Преглед на файлове

Upload files to 'latency_measurements'

Balazs Hangya преди 4 години
родител
ревизия
c478db81a9
променени са 2 файла, в които са добавени 25 реда и са изтрити 0 реда
  1. 25 0
      latency_measurements/README.md
  2. BIN
      latency_measurements/picoscope_pulsedelay.pssettings

+ 25 - 0
latency_measurements/README.md

@@ -0,0 +1,25 @@
+Picoscope setup: picoscope_pulsedelay.pssettings
+
+Requirements for running the python scripts:
+  pyzmq, pyserial, pandas, matplotlib
+
+Scripts in data_scripts/scripts:
+  Setup A: Arduino sink - needs no additional scripts
+  Setup B: OE + ZMQIf + OPETH stub for digital input delays: 4_oeevent
+           supplementary measurement scripts for ZMQ and UART latency are in
+              1_zmqlatency
+              2_uart_loopback_A-PC-A
+              3_uart_loopback_PC-A-PC
+           .ino files are to be uploaded by Arduino IDE to an Arduino uno
+  Setup C and D: analog data - 5_oedata
+           same .ino file as for 4_oeevent
+  Setup D only:
+           For Intan headstage, threshold should be manually adjusted
+           Intan measurements were performed on a different PC with less capable picoscope,
+           using a matlab script for streaming the measurement data. 
+           5-oe-intan-All_104_Delays.mat was manually converted to 5-oe_intan.csv.
+
+Generating data plots:
+  python procpico.py <csv file> [title]
+  
+  (title is optional, used if filename is not in dictionary)

BIN
latency_measurements/picoscope_pulsedelay.pssettings