123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645 |
- pro hannah_master_tiff_neu
- ; sample master file
- ; containing all available flags as of september 2008
- ; sorted in logical groups
- ; note, however, that not all flag settings are mentioned
- ; you still need to know what you can do and what the program does
- ; and you still need to run the necessary constrols
- ;set common blocks to get access to the variables
- common data ;contains all data variables
- common vars ;contains those flags that are not "flag[xxx]"
- common CFD ;contains the flag-variables
- common CFDconst ;contains the names of the flag-variables
- common ExportMovieFlags ;contains the flags for movie control
- ; general system settings in VARS
- ;colortable (for byte values 0-255)
- colortable = 12
- ;often used color tables are: (some defined in DefineExplicitCt.pro)
- ; 0 for black and white
- ; 11, 12, 13 for a smooth rainbow. They differ in BW colors for color 0 and 255
- ; optimized for printout or for screen
- ; 14 has 128 as grey, lower range cyan to blue, upper range yellow to red
- ; 36: cyan-blue-*black*-red-yellow-white
- ; 37: cyan-blue-*black*-red-yellow
- ; 38: black-red-yellow-white table
- ;internal variable for mac compatibitity, not used any more
- flag[MacSystem] = (!version.os_family eq 'MacOS')
- ;setting for interactive mode ("view"), or master_mode
- flag[BatchMode] = 1
- ;graphics flag
- flag[TrueColour] = 0
- ;end of general settings
- ;*****************************
- ;flags related to LOADING DATA
- ;*****************************
- ;format of data files (used in LoadDataMaster.pro)
- flag[view_loadExp] = 3;3;4 ; 0 for old setup, to 1 for Visicam, 2 for confocal
- ;TILL photonics single wavelength: 3
- ;TILL photonics dual wavelength (FURA): 4
- ;ZEISS multiphoton data: 20
- ;should the raw data be median filtered? (used in ViewLoadData\MedianCorrection.pro)
- flag[CSM_Median] = 3
- ;do a median correction when loading the data
- ;0: no median
- ;1: median in space fixed values
- ;2: median in time fixed values
- ;3: median in space and time, using flag values (CSM_Median_space)(CSM_Median_time)
- flag[CSM_Median_space] = 5
- ; used with CSM_Median eq 3
- flag[CSM_Median_time] = 0
- ; used with CSM_Median eq 3
- ;apply an off-line binning (shrinkFaktor).
- flag[le_shrinkFaktor] = 1 ;no shrinkfaktor with 1
- ;are there different focal depth to be split?
- flag[RM_separateLayers] = 0
- ;separates the layers in exportGlomeruli and SingleOverviews
- ;how to make movement correction based on .moveList file. (used in ViewLoadData\MovementCorrectionMaster.pro)
- flag[CSM_Movement] = 0
- ;set to 0: no movement correction (BUT shifts from .lst file are USED!)
- ;set to 1: on the spot movement correction
- ;set to 2: as 1, but calculated movements are saved in the moveList file
- ;set to 3: movement values are read from the moveList file
- ;set to 5: no movement correction, but shifts are taken from the movement file
- ;values above 10: mathiasCorrection.
- flag[CSM_DataShift] = 1
- ;set to 0: data is NOT shifted, coordinates ARE shifted
- ;set to 1: data IS shifted, coordinate are NOT shifted
- ;set to 2: NONE is shifted
- ;trim the data frames to be loaded
- ;remove n frames at the beginning of each measurement
- flag[CSM_SkipFrmUpFront] = 0
- ;remove n frames at the end of each measurement
- flag[CSM_SkipFrmAtBack] = 0
- ;settings to reduce memory usage
- flag[VIEW_No4Darray] = 0
- ;this reduces the sig1 array to a 3D array instead of a 4D array; not all routines work with this setting
- ;set to 1: odor 0 is cut off memory after loading the data, p1.odors is reduced by 1
- flag[VIEW_DeleteRawData] = 1
- ;this removes the raw data from memory after loading
- ;correct for scattered light, improving spatial resolution (used in CalcSigAll3000.pro)
- flag[VIEW_ScatterLightFactor] = 1
- ;for the 3xyy and 4xyy family with scattered light correction, this factor gives the strength of the unsharp mask. Default: 1
- ;only used if (yy ne 00)
- ;load more than one experiment at the time
- flag[view_MultiExp] = 0 ; 0 for single experiment
- ;load AIR trial alongside the odor response (air trial is given in control column in the .lst file)
- flag[LE_AskForAir] = 0 ; 0 for not loading air
- ;END of flags related to loading data
- ;************************************
- ;flags related to CALCULATING SIGNALS
- ;************************************
- ;how to calculate the data (used in ViewCalculateData\CalcSigMaster.pro)
- flag[view_CalcMethod] = 3550; see calcsigmaster3000
- ;family 3xyy (deltaF/f) and 4xyy (ratio) uses x for bleach correction settings, and yy for scattered light correction
- ;see CalcSigAll3000.pro for detailed settings. Example are:
- ; setting: 0 1 2 3 4 5 6 7 8 9
- ;alPerimeter + + + + - - - - C - ; with 8 bleaching is in coordinates only (variable: CoorPerimeter)
- ;excludeStim - + - + - + - + - - ; exclude stimulus is obsolete - controled by LE_BleachStartFrame group
- ;addNoise - - + + - - + + - -
- ;no bleach - - - - - - - - - +
- ;air bleach - - - - - - - - + - ;correct with bleach parameters taken from air trial
- ;set to 3 for no calculation (original data).
- ;which frames to use for calculating F in deltaF/F
- flag[LE_StartBackground] = 4; for deltaF/F calculations, or bleach corrections
- ;set to -1 not to subtract background in data calculation, to frame for background start. Default: 4
- flag[LE_PrestimEndBackground] = 0; for deltaF/F calculations, or bleach corrections
- ;How many frames before stimulus to stop with background. Default: 2
- ;so: background is calculated from LE_StartBackground to StimulusOn - LE_PrestimEndBackground
- ;that means that StimulusOn is an important parameter and needs to be set correctly for deltaF/F
- ;settings for bleach correction when using CalcSigAll3000
- flag[LE_BleachStartFrame] = 1; start bleaching correction here
- ;for logarithmic bleach correction, all frames smaller are excluded in the fit function
- ;used in CalcSigAll3000; default 2
- flag[LE_LogInitialFactor] = 3; weigh the frames before stimulus more than those after stimulus
- ;for logarithmic bleach correction, all frames before stimulus onset are more important by this factor
- ;used in CalcSigAll3000; default 1 for maximum compatibility
- flag[LE_LogExcludeSeconds] = 12; 15 für vaga; 12 für vaga2016; 12 für Apis; how many seconds should be excluded during stimulation for bleach log fitting?
- ;for logarithmic bleach correction, how many seconds after stimulus onset to exclude
- ;used in CalcSigAll3000; default 0 for maximum compatibility
- ;this uses the time information - therefore make sure that is correct
- ;graphic display of weights can be switched of and on in the program CalcSigAll3000
- ;END of flags related to calculating signals
- ;************************************
- ;flags related to SIGNAL CORRECTIONS
- ;************************************
- ;note: this is for the extra set of corrected signals, not for corrections done during loading or calculation
- ;ask for air needs to be set to 1 to use this
- flag[VIEW_InitCorr] = -1 ; set to -1 in order not to create a corrected data set
- CorrectFlag = 0 ; set to 1 to access corrected dataset, to 0 to access original data set
- ;*************************************
- ;flags related to data analysis OUTPUT
- ;*************************************
- flag[VIEW_ReportMethod] = 119 ; which output do you want? This is one of the main flags
- ; all settings are in View_gr_reports\subloop_report.pro; the most often used are
- ; 10: false-color coded pictures (calls reportTIFF)
- ; 11, 111: glodatamix (without, with tags)
- ; 12: movies
- ; 19, 119: glodatamix with CTV (without, with tags)
- flag[CTV_Method] = 22 ; curve-to-value function for single number output or still images
- ; 22 gives
- ; 22 is the difference between two fixed points
- ; 35 relates to the maximum within 3 secs after stimulus onset
- ; all values in ViewOverview\CurveToValue
- ; values below 0 go to personal program in ImageALlocal folder: CurveToValueLocal.pro
- flag[CTVM_Method] = 0 ; for multiple CTV values at once, not safely implemented yet
- firstframe = 60 ; 70; vaga2016 60; many CTVs use fixed frames. These use the variables firstFrame and lastFrame
- lastframe = 30 ; 35; vaga2016 30; for example, CTV 22 calculates the difference between lastframe (3 frames) and firstframe (3 frames)
- flag[LE_FirstBuffer] = 1 ; sets which buffer to start with in output routines
- ; standard is 1. Set to 0 to start with 0 (generally 0 is empty)
- ; instead of LE_firstbuffer you can use LE_usefirstbuffer (synonymous)
- ;old flags, currently out of fashion
- flag[PTA_PlotTimeRange] = 1 ;
- flag[PTA_PlotMeanValue] = 1 ;
- ;flags specifically for graphical output (TIFF files and the like, i.e. "overviews")
- flag[SO_Method] = 10 ; used in ViewOverview\Overview.pro. Only values 0 or 10 are used now
- ; 0 for calculations pixel by pixel (i.e. on the time-course in each pixel)
- ; 10 for calculations frame by frame (much faster, but not all functions are possible)
- ; for 10, the CTV value is applied within ViewOverview\overview10ctv.pro
- flag[SO_indiScale] = 3 ; what scaling to use? 0 for fixed values, else individual scale for each frame
- ; 3 for scaling within center of each frame
- ; can be used in quite sophisticated ways, see ViewOverview\SingleOverviews.pro
- ; also explained in the documentation
- scalemax = 3.000 ; value to scale maximum to with SO_indiScale equals 0
- scalemin = -1.000 ; corresponding value for minimum
- flag[SO_morphoBackgr] = 0 ; Used to show an anatomical picture with an overlay of only the strongest POSITIVE responses
- flag[SO_morphoBackgrNeg] = 0 ; Used to show an anatomical picture with an overlay of only the strongest NEGATIVE responses
- flag[SO_withinmask] = 0 ; False-color output limited to the mask in the .area file
- flag[CTV_scalebar] = 0 ; some output options allow to print out the color scalebar (SingleOverviews.pro)
- flag[RM_FotoOk] = 1 ; Overlay other information to overview output, (SingleOverviews.pro)
- ; 1: puts squares in the coordinate positions (from .coor file)
- ; 5: shows the perimeter of the .area file
- flag[RM_differentViews] = 0 ; Change view, e.g. mirror flip right ALs (SingleOverviews.pro)
- flag[RM_unsharpmask] = 0 ; Post-hoc filter on false-color images (SingleOverviews.pro)
- flag[RM_NewColumn] = 0 ; Start a new column in "tapeten" output (SingleOverviews.pro)
- ; this flag is generally set in the gr_XXX file
- ;old flags
- flag[RM_PlotTrace] = 0 ;
- flag[RM_PrintAscii] = 0 ;
- flag[RM_PrintLine] = 0 ;
- flag[RM_ROItrace] = 0 ;
- ;flags for filters
- flag[FT_radius] = 5 ; 5 vaga; 10 Apis; For calculating traces (glodatamix), or for some spatial filters
- FilterSpaceFlag = 0 ; If set to 1, the signal is calculated on the time trace at each pixel
- ; after taking the mean of the pixels around it (FT_radius). Therefor this is a slow filter
- ; If set to 0, this filter is switched off
- FilterSpaceSize = 3 ; Filter size applied after overview calculation, always.
- ; set to 0 when FilterSpaceFlag is on, to avoid double filtering.
- FilterTimeFlag = 0 ; Switch for the temporal filter
- FilterTimeSize = 0 ; Size of the temporal filter
- ;Linestiles in IDL are (for fast traces):
- ; 0: solid; 1: dotted; 2: dashed; 3: dash-dot; 4: dash-dot-dot; 5: long dashes
- ;*******************************************
- ;flags to control PATHS for input and output
- ;*******************************************
- ; this is one standard arrangement of folders
- ; just adapt the MotherOfAllFolders, but all subfolders must exist
- ; place where all files are
- ; MotherOfAllFolders = 'C:\Hannah\PhD\Konstanz08\hannah08\'
- MotherOfAllFolders = 'E:\HannahData\Konstanz\IDL\'
- flag[stg_ReportTag] = 'XXX' ; this contains the animal flag; set this for each round and animal,
- ; this is set within the gr_file
- ; folder for the data files
- ;flag[STG_Datapath] = MotherOfAllFolders + 'data\'
- flag[STG_Datapath] = 'E:\HannahData\Konstanz\Data\2018\Hanna_OXON-PELM_summer2018\'
- ; folder for the .inf files
- flag[STG_OdorInfoPath] = MotherOfAllFolders + 'IDL\lists\'
- ;flag[STG_OdorInfoPath] = 'E:\HannahData\Konstanz\Data\Hannah16\'
- ; folder for the .coor and the .area file
- flag[STG_OdormaskPath] = MotherOfAllFolders + 'IDL\coor\'
- ; folder for the all OUTPUT files
- flag[STG_OdorReportPath] = MotherOfAllFolders + 'IDL\IDLoutput\'
- ; this is not used any more
- flag[STG_OdorReportFile] = ''
- ; I don't know where this is used any more
- flag[STG_Missing] = '999'
- ;************************************
- ;flags used for MOVIE output
- ;************************************
- ; in interactive mode, these flags are overwritten by the values in
- ; imageALlocal\SetExportMovieFlags.pro
- ; the variables are defined in view.pro
- mv_exportFormat = 6 ; 1 for TIFF (single files), 2 for PICT (premiere), 3 for MPEG, 4 for multilayer GIF, 5: multilayer TIF
- ; 6 for uncompressed AVI (generally the best)
- mv_realTime = 0 ; insert frames per second, 0 for no realTime, 24 for MPEG, 15 for GIF->QuickTime
- ; AVI can work with any time, therefore 0 IS realTIME. In the other formats, additional frames are invented to create real time
- ; if a negative number is given, that many frames are removed
- mv_SpeedFactor = 1 ; for exportFormat 6, increase or decrease speed of movie
- mv_reverseIt = 1 ; turn it upside down
- mv_rotateImage = 0 ; rotate only image, ; 0 for no action, 2 for 180 degrees
- mv_cutborder = 0 ; how many pixels to cut from each side (border, to hide filter artefacts)
- mv_morphoThreshold = 0 ; substitutes lower range with morphological image to be taken from file
- mv_withinMask = 0 ; limits output to within the mask in xxx.area
- mv_sdSignificanceCut = 0 ; cuts everything below that significance level. Stimulus is included in calculation, ignored if below 0.1.
- ; ; Not implemented yet
- mv_markStimulus = 1 ; marks stimulus application with a red box
- mv_percentileScale = 0 ; scaling to a percentaje of noise. don´t use
- mv_individualScale = 3 ; follows a similar logic to (flag[so_indiScale])
- ;0, 1: Pixmin and Pixmax are taken
- ;2 : min and maximum of sequence is taken
- ;3 : min and max of central region is taken
- ;4 : max of sequence is taken, min is Pixmin
- ;5 : min and max from area region
- ;6 : min from pixmin, max from area
- ;7 : min from pixmin, max from area but only stimulus + 2*stimulus length
- mv_indiScale3factor = 0.2 ; set to 0.2 for 20 % border to be ignored when scaling usind idividualscale eq 3
- ; for mv_individualScale above 100
- mv_percentileValue = 0 ; = float(individualScale MOD 100)/100.0
- mv_xgap = 30 ; vertical + horizontal gaps, only even numbers!
- mv_ygap = 50 ; 6, 10
- mv_correctStimulusOnset = 0 ; value to be added to stimulus onset (in frames)
- mv_displayTime = 1 ; time in ss:ms as figures
- mv_minimumBrightness = 0 ; creates a mask that depends on the brightnes of the foto
- ;these flags are for interactive use in view (fasttraces)
- ;but are also used in movies to select a frame range for movie output
- ;set both to -1 to calculate the entire movie, else to fixed frame numbers
- flag[FT_FirstFrame] = -1 ; show trace subsed in fast traces in VIEW
- flag[FT_LastFrame] = -1 ; show trace subsed in fast traces in VIEW
- ;flags that are also relevant for movies; do NOT change them here to avoid confusion, change them above
- ;check program viewoverview\Exportmovie
- ;flag[ctv_scalebar]
- ;scaleMin
- ;scaleMax
- ;filterSpaceFlag
- ;filterSpaceSize
- ;colortable
- ;FILENAME defined in localOdorText
- ;end of movie settings
- ;************************************
- ;flags NOT USED for off-line analysis
- ;************************************
- flag[LE_ShowBox] = 0 ;
- flag[FT_AllOdors] = 0 ; show all odor traces in fast traces in VIEW
- flag[FT_TimeXAxis] = 0 ; show time as x-axis in fast traces in VIEW
- flag[FT_Subset] = 0 ; show trace subsed in fast traces in VIEW
- flag[FT_SelectFrame] = 0 ; show trace subsed in fast traces in VIEW
- ;**************************************************************************************************************
- ; calling via a gr file needs a line as this one:
- ;flag[stg_reporttag] = '060503a_22a' & gr_060503a_22a
- ; calling without a fixed order can be done with
- ; gr_takefromlist, '060503a_22a', 2
- ; here the number 2 relates to the corresponding column in the .lst file;
- ; which measurements are picked depends on this number
- ;animallist
- flag[so_indiScale] = 3; 0
- ;call another program that contains the individual animal's lists
- ;tapeten_list ;Apis
- ;GC_list
- ;GC_2013_list
- ;Vespula
- ;vaga2016
- ;Apis2018_winter
- Apis2018_summer
- ;
- ; scalemax =3.000
- ; scalemin = -2.000
- ;flag[stg_reporttag] ='HS_bee_OXON_PELM_180420'
- ;gr_HS_bee_OXON_PELM_180420
- ;;gr_takefromlist, 'HS_bee_OXON_PELM_180420', 2
- ; scalemax =3.000
- ; scalemin = -2.000
- ;flag[stg_reporttag] ='HS_bee_OXON_180727'
- ;gr_HS_bee_OXON_180727
- ;;gr_takefromlist, 'HS_bee_OXON_180727', 2
- ;
- ; scalemax =3.000
- ; scalemin = -2.000
- ;flag[stg_reporttag] ='HS_bee_OXON_180416a'
- ;gr_HS_bee_OXON_180416a
- ;;gr_takefromlist, 'HS_bee_OXON_180416a', 2
- ;
- ; scalemax =3.000
- ; scalemin = -2.000
- ;flag[stg_reporttag] ='HS_bee_PELM_180416b'
- ;gr_HS_bee_PELM_180416b
- ;gr_takefromlist, 'HS_bee_PELM_180416b', 2
- ;
- ; scalemax =3.000
- ; scalemin = -2.000
- ;flag[stg_reporttag] ='HS_bee_OXON_PELM_180417'
- ;;gr_HS_bee_OXON_PELM_180417
- ;gr_takefromlist, 'HS_bee_OXON_PELM_180417', 2
- ; scalemax =3.000
- ; scalemin = -2.000
- ;flag[stg_reporttag] ='vaga160425a'
- ;;gr_vaga160425a
- ;gr_takefromlist, 'vaga160425a', 2
- ;
- ;
- ; scalemax =3.000
- ; scalemin = -2.000
- ;flag[stg_reporttag] ='vaga160407b'
- ;gr_vaga160407b
- ;Unterschied Andrena vaga - Apis: Radius, LogExcludeSeconds, CTV first frame last frame
- ;flag[stg_reporttag] = 'vaga9414_1'
- ; scalemax = 3.500
- ; scalemin = -1.000
- ;;gr_vaga9414_1
- ;
- ;flag[stg_reporttag] = 'vaga9414_2'
- ; scalemax = 3.500
- ; scalemin = -1.000
- ;;gr_vaga9414_2
- ;
- ;flag[stg_reporttag] = 'vaga9415_2'
- ; scalemax = 3.500
- ; scalemin = -1.000
- ;;gr_vaga9415_2
- ;
- ;flag[stg_reporttag] = 'vaga9415_3'
- ; scalemax = 3.500
- ; scalemin = -1.000
- ;;gr_vaga9415_3
- ;
- ;flag[stg_reporttag] = 'vaga9416_1'
- ; scalemax = 3.500
- ; scalemin = -1.000
- ;;gr_vaga9416_1
- ;
- ;flag[stg_reporttag] = 'vaga9416_2'
- ; scalemax = 3.500
- ; scalemin = -1.000
- ;;gr_vaga9416_2
- ;
- ;flag[stg_reporttag] = 'vaga9417_1'
- ; scalemax = 3.500
- ; scalemin = -1.000
- ;;gr_vaga9417_1
- ;
- ;flag[stg_reporttag] = 'vaga9417_2'
- ; scalemax = 3.500
- ; scalemin = -1.000
- ;;gr_vaga9417_2
- ;
- ;
- ;flag[stg_reporttag] = 'vaga9418_1'
- ; scalemax = 3.500
- ; scalemin = -1.000
- ;;gr_vaga9418_1
- ;
- ;
- ;
- ;
- ;
- ;
- ;
- ;flag[stg_reporttag] = 'vaga8405a'
- ; scalemax = 3.500
- ; scalemin = -1.000
- ;;gr_vaga8405a
- ;;gr_takefromlist,'vaga8405a',2
- ;
- ;flag[stg_reporttag] = 'vaga8406b'
- ; scalemax = 4.000
- ; scalemin = -1.000
- ;;gr_vaga8406b
- ;;gr_takefromlist,'vaga8406b',2
- ;
- ;flag[stg_reporttag] = 'vaga8407a'
- ;;gr_vaga8407a
- ;;gr_takefromlist,'vaga8407a',2
- ;
- ;flag[stg_reporttag] = 'vaga8407b_2'
- ;;gr_vaga8407b_2
- ;;gr_takefromlist,'vaga8407b_2',2
- ;
- ;flag[stg_reporttag] = 'vaga8408a'
- ;;gr_vaga8408a
- ;;gr_takefromlist,'vaga8408a',2
- ;
- ;flag[stg_reporttag] = 'vaga8409a'
- ; scalemax = 4.500
- ; scalemin = -1.000
- ;;gr_vaga8409a
- ;;gr_takefromlist,'vaga8409a',2
- ;
- ;flag[stg_reporttag] = 'vaga8410b'
- ; scalemax = 4.000
- ; scalemin = -1.000
- ;;gr_vaga8410b
- ;;gr_takefromlist,'vaga8410b',2
- ;
- ;flag[stg_reporttag] = 'vaga8414d'
- ; scalemax = 3.000
- ; scalemin = -1.000
- ;gr_vaga8414d
- ;;gr_takefromlist,'vaga8414d',2
- ;
- ;flag[stg_reporttag] = 'vaga8415a'
- ;gr_vaga8415a
- ;;gr_takefromlist,'vaga8415a',2
- ;
- ;flag[stg_reporttag] = 'vaga8415b'
- ;gr_vaga8415b
- ;;gr_takefromlist,'vaga8415b',2
- ;
- ;flag[stg_reporttag] = 'vaga8415c'
- ;gr_vaga8415c
- ;;gr_takefromlist,'vaga8415c',2
- ;
- ;flag[stg_reporttag] = 'vaga8416b'
- ;gr_vaga8416b
- ;;gr_takefromlist,'vaga8416b',2
- ;
- ;flag[stg_reporttag] = 'vaga8416c'
- ; scalemax = 2.500
- ; scalemin = 0.000
- ;gr_vaga8416c
- ;gr_takefromlist,'vaga8416c',2
- ;
- ;flag[stg_reporttag] = 'vaga8417a'
- ;gr_vaga8417a
- ;;gr_takefromlist,'vaga8417a',2
- ;
- ;flag[stg_reporttag] = 'vaga8418a'
- ;gr_vaga8418a
- ;;gr_takefromlist,'vaga8418a',2
- ;
- ;flag[stg_reporttag] = 'vaga8418b'
- ;;kein IDL/Knime
- ;;gr_vaga8418b
- ;;gr_takefromlist,'vaga8418b',2
- ;
- ;flag[stg_reporttag] = 'vaga8419a'
- ;gr_vaga8419a
- ;;gr_takefromlist,'vaga8419a',2
- ;
- ;flag[stg_reporttag] = 'vaga8420a'
- ;;neue lst und gr erstellt, bringt auch nichts
- ;;gr_vaga8420a
- ;;gr_takefromlist,'vaga8420a',2
- ;
- ;flag[stg_reporttag] = 'vaga8421a'
- ;gr_vaga8421a
- ;;gr_takefromlist,'vaga8421a',2
- ;
- ;flag[stg_reporttag] = 'vaga8422a'
- ;gr_vaga8422a
- ;;gr_takefromlist,'vaga8422a',2
- ;
- ;flag[stg_reporttag] = 'vaga8423a'
- ;gr_vaga8423a
- ;;gr_takefromlist,'vaga8423a',2
- ;
- ;flag[stg_reporttag] = 'vaga8423b'
- ;gr_vaga8423b
- ;;gr_takefromlist,'vaga8423b',2
- ;
- ;flag[stg_reporttag] = 'vaga8424a'
- ;gr_vaga8424a
- ;;gr_takefromlist,'vaga8424a',2
- ;
- ;flag[stg_reporttag] = 'vaga8424b'
- ;gr_vaga8424b
- ;;gr_takefromlist,'vaga8424b',2
- ;
- ;flag[stg_reporttag] = 'vaga8425a'
- ;gr_vaga8425a
- ;;gr_takefromlist,'vaga8425a',2
- ;
- ;flag[stg_reporttag] = 'vaga8428a'
- ;gr_vaga8428a
- ;;gr_takefromlist,'vaga8428a',2
- ;
- ;flag[stg_reporttag] = 'vaga8429a'
- ;;keine lst-Datei vorhanden; Stromausfall
- ;;gr_vaga8429a
- ;;gr_takefromlist,'vaga8429a',2
- ;
- ;flag[stg_reporttag] = 'vaga8429b'
- ;gr_vaga8429b
- ;;gr_takefromlist,'vaga8429b',2
- ;
- ;flag[stg_reporttag] = 'vaga8430a'
- ;gr_vaga8430a
- ;;gr_takefromlist,'vaga8430a',2
- ;
- ;flag[stg_reporttag] = 'vaga8430b'
- ;gr_vaga8430b
- ;;gr_takefromlist,'vaga8430b',2
- ;
- ;flag[stg_reporttag] = 'vaga8501a'
- ;gr_vaga8501a
- ;;gr_takefromlist,'vaga8501a',2
- ;
- ;flag[stg_reporttag] = 'vaga8501b'
- ;gr_vaga8501b
- ;;gr_takefromlist,'vaga8501b',2
- ;
- ;flag[stg_reporttag] = 'vaga8501c'
- ;gr_vaga8501c
- ;;gr_takefromlist,'vaga8501c',2
- ;
- ;flag[stg_reporttag] = 'vaga8504a'
- ;gr_vaga8504a
- ;;gr_takefromlist,'vaga8504a',2
- ;
- ;flag[stg_reporttag] = 'vaga8507a'
- ;gr_vaga8507a
- ;;gr_takefromlist,'vaga8507a',2
- end;
|