sub-147_task-PROJECT_DAYS_P3_NUMBERS_ROZBALENA_eeg.vhdr 2.0 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061
  1. Brain Vision Data Exchange Header File Version 1.0
  2. ; Data created by the Vision Recorder
  3. [Common Infos]
  4. Codepage=UTF-8
  5. DataFile=sub-147_task-PROJECT_DAYS_P3_NUMBERS_ROZBALENA_eeg.eeg
  6. MarkerFile=sub-147_task-PROJECT_DAYS_P3_NUMBERS_ROZBALENA_eeg.vmrk
  7. DataFormat=BINARY
  8. ; Data orientation: VECTORIZED=ch1,pt1, ch2,pt1 ...
  9. DataOrientation=VECTORIZED
  10. NumberOfChannels=3
  11. ; Sampling interval in microseconds
  12. SamplingInterval=1000
  13. [Binary Infos]
  14. BinaryFormat=IEEE_FLOAT_32
  15. [Channel Infos]
  16. ; Each entry: Ch<Channel number>=<Name>,<Reference channel name>,
  17. ; <Resolution in "Unit">,<Unit>, Future extensions..
  18. ; Fields are delimited by commas, some fields might be omitted (empty).
  19. ; Commas in channel names are coded as "\1".
  20. Ch1=Fz,,1,µV
  21. Ch2=Cz,,1,µV
  22. Ch3=Pz,,1,µV
  23. [Comment]
  24. A m p l i f i e r S e t u p
  25. ============================
  26. Number of channels: 3
  27. Sampling Rate [Hz]: 1000
  28. Sampling Interval [µS]: 1000
  29. Channels
  30. --------
  31. # Name Phys. Chn. Resolution / Unit Low Cutoff [s] High Cutoff [Hz] Notch [Hz] Gradient Offset
  32. 1 Fz 14 1 µV DC 0 Off
  33. 2 Cz 15 1 µV DC 0 Off
  34. 3 Pz 16 1 µV DC 0 Off
  35. S o f t w a r e F i l t e r s
  36. ==============================
  37. # Low Cutoff [s] High Cutoff [Hz] Notch [Hz]
  38. 1 Off 40 Off
  39. 2 Off 40 Off
  40. 3 Off 40 Off
  41. Data / Ref / Gnd Electrodes Selected Impedance Measurement Range: 0 - 5 kOhm
  42. Impedance [kOhm] at 12:18:00 :
  43. Fz: Out of Range!
  44. Cz: Out of Range!
  45. Pz: Out of Range!
  46. Ref: Out of Range!
  47. Gnd: Out of Range!
  48. 12:26:25 Error: Recording Paused due to an Error:
  49. Connection between USB cable and Computer is broken.
  50. Monitoring or recording was interrupted. Please check
  51. the USB connectors. If problem still persists, contact
  52. us at techsup@brainproducts.com