12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697 |
- %\documentclass[english,onecolumn,final]{svjour2}
- \documentclass{article}
- \usepackage{graphicx}
- \usepackage{tikz}
- \usepackage{pgflibraryshapes}
- \usetikzlibrary {shapes}
- \usepackage{calc}
- \usepackage{color}
- \definecolor{invisible}{gray}{1.0}
- \definecolor{green}{rgb}{0.0,1.0,0.0}
- %\input{commands.tex}
- %define counters
- \newcounter{mynum}
- %\renewcommand\normalsize{\fontsize{20pt}{20pt}\selectfont}
- \setlength{\textwidth}{20cm}
- \setlength{\textheight}{30cm}
- \pagenumbering{arabic} % but no page numbers are printed because:
- \pagestyle{empty} % this is actually already in the kernel
- \newcommand{\MainDocDir}{..}
- \begin{document}
- \newcommand{\coordinatesys}[5]{
- \path #1 coordinate (xy);
- \draw [-latex,very thick](xy) +(0,0) -- +(4,0);
- \draw [-latex,very thick](xy) +(0,0) -- +(0,4);
- \draw (xy) +(0,2.2) -- +(1.1,2.2);
- \draw (xy) +(1,0) -- +(1,2.3);
-
- \draw [-latex] (xy) +(1.5,1.7) -- +(1.1,2.1);
- \draw (xy) +(3,1.5) node {#5};
- \draw (xy) +(2.5,3.5) node {#2};
- \draw (xy) +(3,0.2) node {#3};
- \draw (xy) +(0.2,4.2) node {#4};
- }
- \newcommand{\coordinatedreid}[6]{
- \path #1 coordinate (xy);
- \draw [-latex,very thick](xy) +(0,0) -- +(4,0);
- \draw [-latex,very thick](xy) +(0,0) -- +(0,4);
- \draw [-latex,very thick](xy) +(0,0) -- +(3,1.5);
-
- \draw (xy) +(0,2) -- +(1,2);
- \draw (xy) +(1,0) -- +(1,2);
- \draw (xy) +(1,2) -- +(2.1,2.5);
- \draw (xy) +(1,0) -- +(2,0.5);
- \draw (xy) +(1,0.5) -- +(2,0.5);
- \draw (xy) +(2,0.5) -- +(2,2.6);
- \draw [-latex] (xy) +(2.5,2.65) -- +(2.1,2.55);
- \draw (xy) +(3.5,2.6) node {#6};
- \draw (xy) +(3.7,1.5) node {#5};
- \draw (xy) +(2.5,3.5) node {#2};
- \draw (xy) +(3,0.2) node {#3};
- \draw (xy) +(0.2,4.2) node {#4};
- }
- \newcommand{\texpic}{
- \begin{tikzpicture}
- %\draw [-latex,very thick](0,0) -- (10,0);
- %\draw [-latex,very thick](0,0) -- (0,10);
- \coordinatesys{(0,0)}{POST}{source(0)}{synapsennr.(1)}{nr. des postneurons}
- \coordinatesys{(6,0)}{S}{source(0)}{synapsennr.(1)}{Gewichtsstaerke}
- \coordinatesys{(0,-6)}{DELAY-LENGTH}{source(0)}{synapsennr.(1)}{?}
- \coordinatedreid{(6,-6)}{DELAYS}{source(0)}{delay(1)}{?(2)}{synapsennr.}
- \end{tikzpicture}
- }
- \color{invisible}
- .\\
- .
- \color{black}
- \texpic
- \color{invisible}
- .
- \end{document}
|