in-house-gin

This repository documents how to set up a custom instance of the GIN G-Node infrastructure service. The project's source code of can be found on github.

Set up GIN in your lab

If you plan to set up a GIN Server in your own lab, you are more than welcome to do so. All our software is based on open source projects and therefore meant to be used, extended and modified by others. The features we implemented on top of gogs are available on Github.

Should you have problems or questions in the process, contact us at gin@g-node.org. Even if you have no trouble, we would love to receive your feedback or just learn from you that you have just set up your own GIN!

Support

The in-house GIN has gained a lot of traction in the last year, which we are very happy to see and also happy to support as much as we can. With the growing number of in-house GIN users, we also receive many requests for service set-up support and maintenance. Often these are simple matters, and we try to keep the documentation as up-to date and helpful as possible, but since we are a small open-source team, the growing demand for support takes up quite some of our time.

Since we are providing this service for free, we would like to ask you in to support your fellow in-house users and help each other out running the service. To this end we are running a dedicated slack workspace at in-house-gin.slack.com. Slack can be used either via the browser or by a dedicated slack app.

To join this workspace, we would ask you to send an email to gin@g-node.org with the email address you would like to be invited with. Please note, that this email address will be available to all other members in the channel, use an email address you are comfortable sharing.

This is also the place to discuss new features or companion services that you are employing or would like to try in tandem with GIN. The G-Node team is also hanging around the channel to discuss and help out as much as we can.

You can also fork the in-house repository and supply pull requests to update the in-house documentation with information you would like to see included, open issues on the in-house issue tracker or post them in the slack channels.

Setup prerequisites and preparations

docker and docker-compose are required on the system. If the gin instance should be available within the network or to the outside, we recommend using the GIN instance together with an Apache2 server. Please see the corresponding installation notes for docker and docker-compose for details. Furthermore, a dockerhub account is useful.

As a general note, the documentation is based on OS Debian and relies on docker version >= 20.10.x and docker-compose version >= 1.26.x. Using a different setup might require additional or differing steps.

Test deploying GIN using docker on your local machine

If you are new to docker and docker-compose or deploying services with it, it might be good to test the deployment with a simplified setup using docker on your local machine. This deployment is meant as a means to explore the web frontend of the service.

For a description on how to deploy a full server including a persistent postgres database and customized content, please see the section "Deploy and run full server" below.

If you are not familiar with docker or docker-compose, please get familiar with it. These setup notes try to be very thorough, but differences in host machine setup can lead to issues during the service setup process. Decent knowledge with docker and docker-compose are usually enough to resolve these issues on your own.

Set up GIN with Docker

The easiest way to set up a GIN web frontend server is via pre-built docker containers. You will need a working Docker installation.

You start by downloading the docker image for GIN by typing:

docker pull gnode/gin-web:latest

You can start GIN with:

docker run -p 3000:3000 -p 2222:22 -d gnode/gin-web

You can now visit the website of your GIN server at port 3000 (see the first -p above) of your local machine (localhost:3000). The ssh port can be reached via port 2222 (see the second -p above). You will be greeted with a setup page which will ask you for all the necessary information.

To make the start as easy as possible, select 'SQLite3' as database. This will setup a lightweight database within the docker container for testing purposes. In production use a postgres database as described in the section "Deploy and run full server" below. All other settings can be left with their default value to initialize a test GIN server. Note that if an admin account is not specified on the "First-time Run" page, the first account registered on the running service will become a service admin. Also note that username "admin" is reserved and cannot be used.

This will map all data and configuration into the docker container, which is fine for playing around. However, should you want to use the server for data, it's probably not what you want. Instead, repository data as well as the GIN service config and log files can be mapped to directories of the local host:

docker run -v /somefolder/:/data -p 3000:3000 -p 2222:22 -d gnode/gin-web

This will map the data, configs and such into a directory on the host machine (change "somefolder" accordingly).

If you want the container to run the web service with another user and group id than 1000, you can do this by setting the corresponding environment variables on docker by running:

docker run -v /somefolder/:/data -p 3000:3000 -p 2222:22 -e GITUID="1001" -e GITGID="1001" -d gnode/gin-web

where GITUID and GITGID are followed by the numerical user and group ids respectively.

Update an existing container

To update an existing GIN docker installation you simply need to pull in the changes:

docker pull gnode/gin-web:latest

afterward, you stop the running instance with:

docker stop <containername>

<containername> can be determined with:

docker ps

After that you can start a new version using the same command that you started the original docker container with, e.g.:

docker run -v /somefolder/:/data -p 3000:3000 -p 2222:22 -d gnode/gin-web

Using git with a local docker test setup

add an ssh public key on the running GIN server
clone repositories when testing on localhost using

  git clone ssh://git@localhost:2222/[ginuser]/[ginrepository].git

Deploy and run a full server using docker-compose

The setup for a full server requires docker-compose and is more complex than the simple, local docker setup. But it comes with notes on persistent storage, server customization and notes on how to configure the GIN client to work with your own instance of GIN. If you are considering this option, it might still be worth to try setting up the local version above as described above to familiarize yourself with the basic GIN setup before diving into the more complex one.

This setup will require the files found in the in-house-gin repository. It also assumes, that the service will run behind an http server like Apache. If you still want to test the docker-compose setup on a local machine, you will need to make adjustments to the docker-compose.yml file e.g. mapping port 3000 to make it available.

All the necessary steps should be described and available below. If you still find steps missing or the description ambiguous, please let us know at gin@g-node.org.

Required group and user

To smoothly work with a docker deployment, the following groups and users should be set up.

prepare a dedicated deployment group e.g., "ginservice" group if it does not exist.
create a dedicated deployment user e.g., "ginuser".
for any further setup, all required directories and files should be created with this user/group as owner.
make sure to add all users that are running docker-compose or need access to project files to the docker and deploy groups.

Required directories

The current setup requires certain directories to be available before the containers have started. These directories will contain and persist

the postgres database
all repositories uploaded to the GIN instance
configuration files
custom frontend files

This schema notes all required directories and files:

$GIN_ROOT_FOLDER
├── config
|   ├── postgres
|   |   └── pgressecrets.env
|   └── gogs
|       ├── notice
|       |   └── banner.md   # GIN page notice banner
|       ├── public          # custom frontend style
|       └── templates       # custom frontend files
├── volumes
|   └── ginweb
├── gindata
|   ├── gin-postgresdb
|   └── gin-repositories
└── gin-dockerfile
    ├── .env
    └── docker-compose.yml

The following bash script lines are an example how to set up these required directories.

# Provide the user that will use docker-compose to start the service
DEPLOY_USER=[provide username]

# Specify the GIN files root location
DIR_GINROOT=[provide path to GIN root directory]

# Postgres database password
PGRES_PASS=[changeMe]

# Prepare a ginservice group if it does not exist
if [ $(getent group ginservice) ]; then
  echo "group ginservice already exists."
else
  groupadd ginservice
fi

# Create dedicated "ginuser" user and add it to the "docker"
# group; and the "ginservice" group; create all required 
# directories with this user and the "ginservice" group permission.
if [ $(getent passwd ginuser) ]; then
    echo "user ginuser already exists"
else
    useradd -M -G docker,ginservice ginuser
    # Disable login for user ginuser
    usermod -L ginuser
fi

# Make sure to add the user running docker-compose to the ginservice group as well!
usermod -a -G ginservice $DEPLOY_USER

# Required directories
DIR_GINCONFIG=$DIR_GINROOT/config
DIR_GINVOLUMES=$DIR_GINROOT/volumes
DIR_GINDATA=$DIR_GINROOT/gindata

# Create gin specific directories
# The 'notice' directory may contain a banner.md file.
# The content of this file is displayed on the GIN page without a service restart e.g.
#  to inform users of an upcoming service downtime.
mkdir -vp $DIR_GINCONFIG/gogs/notice
mkdir -vp $DIR_GINCONFIG/gogs/conf
mkdir -vp $DIR_GINCONFIG/postgres

mkdir -vp $DIR_GINVOLUMES/ginweb

mkdir -vp $DIR_GINDATA/gin-repositories
mkdir -vp $DIR_GINDATA/gin-postgresdb

mkdir -vp $DIR_GINROOT/gin-dockerfile

# Create an env file to specify the docker compose project name
echo "COMPOSE_PROJECT_NAME=gin" > $DIR_GINROOT/gin-dockerfile/.env

# Create postgres secret file
echo "POSTGRES_PASSWORD=${PGRES_PASS}" > $DIR_GINCONFIG/postgres/pgressecrets.env

# make sure an empty gogs config file is available; technically only required for previous versions of gogs
touch $DIR_GINCONFIG/gogs/conf/app.ini

If the user running the docker containers is not the ginuser, it might be worth adding this user to both the docker and ginservice group as well. Otherwise, the services might run into permission issues.

Prepare docker-compose file

The resources folder contains an example docker-compose file to set up an in-house GIN instance.

Prepare the docker-compose.yml file in the $DIR_GINROOT/gin-dockerfile directory. The example docker-compose file assumes the directory structure created above to properly map all required volumes.

Update the docker-compose file to match your requirements:

adjust web:environment: use the IDs of the prepared ginuser and ginservice group
make sure the ssh port is set correctly: use e.g. port 2121:22 since server port 22 needs to be available for normal ssh connections
make sure the set IP matches the IP set in your apache2/webserver configuration
ensure the following paths are set correctly to match the created directory structure
- web:volumes: ../gindata/..
- db:volumes: ../gindata/..
if you plan to run the docker-compose setup on localhost you also need to map the port 3000 in the docker-compose file; if you use an http server like an apache do not expose the port via the docker-compose file but include it in the apache configuration.

Adjust file permissions

Change all file permissions of the GIN root directory to ginservice group to ensure the docker services have access to the directories and change group permissions to write.

chown -R ginuser:ginservice $DIR_GINROOT
chmod -R g+rw $DIR_GINROOT

Docker container and initial GIN setup

You can use the gnode/gin-web:latest docker container to run the in-house GIN; this is set as default in the example docker-compose.yml file but can be changed to another container.

fetch all required containers from the docker-gin directory; note that this will pull the appropriate docker containers for the GIN web service and the postgres database.

cd $DIR_GINROOT/gin-dockerfile
docker-compose pull

launch the postgres database container for the initial gin setup

docker-compose up -d db
docker exec -it gin_db_1 /bin/bash
su -l postgres
createuser -P gin
# enter a password for the new role and note it; it will later be used on the initial gin setup page
createdb -O gin gin
exit
exit

launch the gin web docker container for the inital setup; on a local machine it should be accessible in the webbrowser at localhost:3000; if it is set up within a network or via a domain name, it will be available there.
```
docker-compose up -d
```
on the setup page, set the following fields with the corresponding values. For other setup options please refer to the gogs documentation.
- db: postgres
- host: ginpgres:5432
- user: gin
- password: [used during database setup]
- database name: gin
- app name: GIN dev
- repo root: as defined in docker-compose on the container side e.g. /data/repos
- domain: your domain or localhost
- create an administration user; do not use 'admin'; if the database has been restored from a live server, this user will be overwritten.
save; this might redirect to an error page, but this is inconsequential
check that the server is running at your specified domain and you can login with the created admin user
stop all docker containers
```
cd $DIR_GINROOT/gin-dockerfile
docker-compose down
```
- replace config/gogs/conf/app.ini with the file found in resources/app.ini; when in doubt keep the old file and compare entries.
- adjust all settings to fit your server requirements - the example app.ini should fit most settings and directories used so far.
- in the [server] section check DOMAIN, HTTP_PORT and ROOT_URL
- in the [mail] section enable or disable a mail server. Depending on the state of the mailserver, you might want to activate or deactivate registration confirmation by mail.
- in the [security] section, copy the SECRET_KEY value from the automatically create app.ini to this one.
- copy the public and templates directories of this repository to $DIR_GINROOT/config/gogs; this directory is specified via the docker-compose.yml file to hold custom frontend templates for the GIN instance. When the container is started, templates and stylesheets from these directories will overrule same-name files on the server.
- home.tmpl is the main page non-logged in users will see.
- base/head_gin.tmpl contains custom links in the page header
- base/footer_gin*.tmpl templates contain custom entries in the page.
- explore/navbar.tmpl contains categories on the explore page.
- for additional custom content changes please see the "Customize the in-house GIN content" section below
- note that every time the content of the public or tempaltes folder have been changed, the docker container needs to be restarted before the changes take effect.
- adjust file permissions for all added and modified files on the server
```
chown -R ginuser:ginservice $DIR_GINCONFIG
```
stop any running container and restart the full service
```
docker-compose down
docker-compose up -d
docker-compose logs -f
```
NOTE: when working with the GIN server (gin.g-node.org) in parallel with a local or in-house version of GIN, it can happen, that the services have set up different web browser CSRF tokens. This results in the message Invalid csrf token. when submitting any webform data via the web browser. In this case either purge the browser cache or use a different browser all-together.

Customize the in-house GIN content

Apart from changing the main page, as well as header and footer content as described above, most custom pages are hosted via the Wiki of a specific GIN repository wiki: Service/Info. By default the service links and expects the following pages in this particular wiki: Help, News, about, imprint, contact, terms of use and Datenschutz.

To create and edit these on your GIN instance
- log in with an administrative user
- create a Service organisation
- create a Service/Info repository
- set this repo to public
- open this repos' wiki page and initialise the wiki by creating a "home.md" page.
- all files required by default can be added via the wiki of this repository at the address "http://[domain]/Service/Info/wiki"
- "Help" refers to the page "http://[domain]/Service/Info/wiki/Home.md"
- "News" refers to the page "http://[domain]/Service/Info/wiki/News.md"
- "About" refers to the page "http://[domain]/Service/Info/wiki/about.md"
- "Imprint" refers to the page "http://[domain]/Service/Info/wiki/imprint.md"
- "Contact" refers to the page "http://[domain]/Service/Info/wiki/contact.md"
- "Terms of use" refers to the page "http://[domain]/Service/Info/wiki/Terms of use.md"
- "Datenschutz" refers to the page "http://[domain]/Service/Info/wiki/Datenschutz.md"
- alternatively to adding these pages via the web interface, you can add an ssh public key to your user and git clone the wiki repository after it has been initialized: git clone ssh://git@[your domain]:2121/Service/Info.wiki.git
- further information about server frontend customization can be found in the official gogs/gogs documentation about custom templates.
GIN client setup

By default the GIN-client, a command line tool to work with GIN, is set up to work with the GIN server at gin.g-node.org. To use the GIN-Client with an in-house version of gin a couple of additional steps have to be taken. On the machine where a gin client is installed, additional entries can be added to the list of supported servers.

Please note, that you will need to add the port number that is specified as the ssh port in the docker-compose.yml file. In the example this has been set to 2121. The name "alias-in-house" can of course be chosen freely.
```
gin logout
gin add-server --web https://gin.dev.g-node.org:443 --git git@gin.dev.g-node.org:2121 alias-in-house
gin use-server alias-in-house
gin login
```

Avoid exposing debug service

Macaron toolbox, which runs alongside GOGS, exposes a minimal debug control panel at /debug (https://github.com/gogs/gogs/issues/5578).
This control panel can be used to run profiling operations and dump information about the running server. Currently, there's no way to restrict this in code. For now, adding the following Apache configuration will deny all access to the console:

<Location /debug>
    Deny from  all
</Location>

Build your own docker container from source

If the customizations above are not sufficient for your service, you can also clone our GIN github repository, directly edit the source code and build your own docker container. Run it from the root of the repository:

docker build -t [organization-name]/[container-name] .

Ansible galaxy in-house-gin

Mika Pflüger was so kind to create an Ansible role for in-house-gin. If you want to give it a try, you can find the details over at the ansible galaxy page. We take neither credit nor responsibility for this project.

README.md 21 KB

Historique Download

in-house-gin

Set up GIN in your lab

Support

Setup prerequisites and preparations

Test deploying GIN using docker on your local machine

Set up GIN with Docker

Update an existing container

Using git with a local docker test setup

Deploy and run a full server using docker-compose

Required group and user

Required directories

Prepare docker-compose file

Adjust file permissions

Docker container and initial GIN setup

Customize the in-house GIN content

GIN client setup

Avoid exposing debug service

Build your own docker container from source

Ansible galaxy in-house-gin

Further reading

README.md 21 KB Historique Download

in-house-gin

Set up GIN in your lab

Support

Setup prerequisites and preparations

Test deploying GIN using docker on your local machine

Set up GIN with Docker

Update an existing container

Using git with a local docker test setup

Deploy and run a full server using docker-compose

Required group and user

Required directories

Prepare docker-compose file

Adjust file permissions

Docker container and initial GIN setup

Customize the in-house GIN content

GIN client setup

Avoid exposing debug service

Build your own docker container from source

Ansible galaxy in-house-gin

Further reading

README.md 21 KB

Historique Download