ObjSim/simulations/fm/compnest/simcontrol_compnest.tcl

#!/usr/bin/tclsh
#ToDo
# ShowWeights (without Tom)
# ShowWeights at SetTrialNr (driven from simulation)
# switch between facilitatory and normal inhibition (set default to normal)
# WeightSum
# switch between linear and quadratic
# choose Stimulus Set (radio button)
# ShowSelectivity


package require Tk
package require BWidget
wm minsize . 350 400


set SimulationName minimal

set LibSimcontrolPath "$env(HOME)/prog/objsim/src"
source "$LibSimcontrolPath/libsimcontrol.tcl"
source "$env(HOME)/prog/objsim/scripts/getSimLayout.tcl"

TestLibSimcontrol

SetSimDirAndFileNames minimal


proc SetTrialNr {nr} {
    set ::TrialNr $nr
    ShowListWeights ${::LBname}
}


proc StartSim {} {
    set CmdParas {}
    append CmdParas " --SimControlName [tk appname] "
    foreach CmdOpt $::SimOptionsList {
	if {$CmdOpt != "SimControlName"} {
	    append CmdParas " --$CmdOpt $::SimOptions($CmdOpt) "
	}
    }
    foreach CmdFlag $::SimFlagsList {
	if {$::SimFlags($CmdFlag) == 0} {
	    set CmdFlag "No$CmdFlag"
	}
	append CmdParas " --$CmdFlag "
    }
    puts "CommandLineParameter: $CmdParas"
#    exec "./startsim $CmdParas >zombi.txt"
    set ::inout [open "|./startsim $CmdParas" "r"]
#     puts "Neuronentyp: $::NType"
#    fconfigure $::inout -blocking 0 -buffering line -translation crlf -eofchar {}
    while {[eof $::inout] != 1} {
	puts [gets $::inout]	
    }
    close $::inout
#    puts [read $::inout]
#     ShowSim
}

proc StopSim {} {
#    puts $::SimName     
    set ::inout [open "|./startsim stop" "r"]
    while {[eof $::inout] != 1} {
	puts [gets $::inout]	
    }
    close $::inout
#     puts "Neuronentyp: $::NType"
#     fconfigure $::inout -blocking 0 -buffering line -translation crlf -eofchar {}
#     puts [read $::inout]
#     ShowSim
}

proc ShowSim {} {
    set ShowOptions {}
    if {$::SimOptions(NeuronType) == 0} {
	append ShowOptions ",CutSpikes=$::CutSpikePot "
    }
    set Command "csim_showsimspikes, dirname=\"$::SimDataDir\", /sec $ShowOptions \n"
#    set Command "csim_showsimspikes, dirname=\"$::SimDataDir\", /sec \n"
    puts $Command
    puts $::idl $Command
}

proc GenerateParaOverlapInput {} {
    set Options {}
    append ShowOptions ", Active=$::Active "
    append ShowOptions ", Overlap=$::Overlap"
    append ShowOptions ", NPatterns=4"
    append ShowOptions ", OW=5"
    append ShowOptions ", OH=8"
    append ShowOptions ", /Show"
    set Command "makeobjmovie_paraoverlap $ShowOptions \n"
    puts $Command
    puts $::idl $Command
}

proc TestParaEntry {} {
    puts $::InputStrength
    puts $::LearnRate
    puts $::CheckVar
} 


####################StartOfMainProgram
OpenIDL
ReadSimConfigFile


# pack [button .dummy -command "ReadIDL"  -text "ReadIDL"]
# pack [button .showsim -command "ShowSim"  -text "ShowSim"]
labelframe .but0 -width 1500 -height 100 -borderwidth 4 -relief sunken  -text "SimControl" -padx 10 -pady 5
pack .but0 -pady 10
set curframe .but0

# pack [button ${curframe}.test -command "ShowWM1"  -text "ChangeWeightFile"] -side left
# pack [button ${curframe}.test2 -command "ShowWM1"  -text "ChangeWeightFile"] -side left

#pack [button ${curframe}.change -command "ShowWM1"  -text "ChangeWeightFile"] -side left
frame ${curframe}.startstop
pack ${curframe}.startstop -pady 3
set curframe1 ${curframe}.startstop

pack [button ${curframe1}.startsim -command "StartSim"  -text "StartSim"] -side left -padx 5
pack [button ${curframe1}.stopsim -command "StopSim"  -text "StopSim"] -side left

# labelframe ${curframe}.modelchose -text "Choose Neuron Model" -padx 5
# pack ${curframe}.modelchose
# set curframe1 ${curframe}.modelchose
# pack [radiobutton ${curframe1}.one   -value 0 -text "Izhikevich-Neuron"   -variable SimOptions(NeuronType)] -anchor sw
#  pack [radiobutton ${curframe1}.two  -value 1 -text "Izh7-Model-Neuron"   -variable SimOptions(NeuronType)] -anchor sw
#  pack [radiobutton ${curframe1}.three  -value 2 -text "Izh8-Model-Neuron"   -variable SimOptions(NeuronType)] -anchor sw
#  pack [radiobutton ${curframe1}.four  -value 3 -text "Marburg-Model-Neuron"   -variable SimOptions(NeuronType)] -anchor sw
# lappend SimOptionsList NeuronType

# frame ${curframe}.stimselectionframe -padx 1
# pack ${curframe}.stimselectionframe -side top
# set curframe1 ${curframe}.stimselectionframe


# labelframe ${curframe1}.stimsetchoose -text "ChooseStimType" -padx 5
# pack ${curframe1}.stimsetchoose -side right
# set curframe2 ${curframe1}.stimsetchoose
# # pack [radiobutton ${curframe1}.test  -value 9 -text "test"   -variable SimOptions(StimulusNumber)] -anchor sw
# set StimTypeList {}
# lappend StimTypeList [radiobutton ${curframe2}.one -value 0 -command "ShowRadioStimSet 0" -text "Test"   -variable SimOptions(StimulusSet)]
# lappend StimTypeList [radiobutton ${curframe2}.two -value 1 -command "ShowRadioStimSet 1" -text "Parametric"   -variable SimOptions(StimulusSet)]
# lappend StimTypeList [radiobutton ${curframe2}.three -value 2 -command "ShowRadioStimSet 2" -text "Scan"   -variable SimOptions(StimulusSet)] 
# lappend StimTypeList [radiobutton ${curframe2}.four -value 3 -command "ShowRadioStimSet 3" -text "File"   -variable SimOptions(StimulusSet)] 
# lappend StimTypeList [radiobutton ${curframe2}.five -value 4 -command "ShowRadioStimSet 4" -text "ASCII"   -variable SimOptions(StimulusSet)] 
# lappend StimTypeList [radiobutton ${curframe2}.six -value 6 -command "ShowRadioStimSet 3" -text "Sequence"   -variable SimOptions(StimulusSet)] 
# foreach ListItem $StimTypeList {
#     pack $ListItem -anchor sw
# }
# lappend SimOptionsList StimulusSet

# labelframe ${curframe1}.stimchoose -text "Choose Stimulus Set" -padx 2
# #frame ${curframe1}.stimchoose -padx 5
# pack ${curframe1}.stimchoose -side left
# set StimNumberChooseFrame ${curframe1}.stimchoose
# set StimSelectionList {}


proc ShowRadioStimSet {StimSetNr} {
    puts $StimSetNr
    set curframe1 $::StimNumberChooseFrame
    DestroyElements $::StimSelectionList

    set Delindex [lsearch $::SimOptionsList StimFileName]
    if {$Delindex != -1} {
	set ::SimOptionsList [lreplace $::SimOptionsList $Delindex $Delindex]
    }

    if {$StimSetNr == 0} {
	set ::StimSelectionList {}
	lappend ::StimSelectionList [radiobutton ${curframe1}.one   -value 0 -text "5x5, 4 stim, no overlap"   -variable ::SimOptions(StimulusNumber)]
	lappend ::StimSelectionList [radiobutton ${curframe1}.two  -value 1 -text "5x5, 4 stim, small overlap"   -variable ::SimOptions(StimulusNumber)]
	lappend ::StimSelectionList [radiobutton ${curframe1}.three  -value 2 -text "5x5, 4 stim, high overlap"   -variable ::SimOptions(StimulusNumber)] 
	foreach ListItem $::StimSelectionList {
	    pack $ListItem -anchor sw
	}	
    }

    if {$StimSetNr == 1} {
 	frame ${curframe1}.genovpat 
 	pack ${curframe1}.genovpat
 	set curframe2 ${curframe1}.genovpat
 	lappend ::StimSelectionList  $curframe2

	set ::Active 0.2
	set ::Overlap 0.8
	SimParaEntry active ::Active $curframe2
	SimParaEntry overlap ::Overlap $curframe2
	pack [button ${curframe2}.genoverlapbutton -command "GenerateParaOverlapInput"  -text "GenOvInput"] -side bottom
    }

    if {$StimSetNr == 3} {
  	frame ${curframe1}.stmfilename 
  	pack ${curframe1}.stmfilename
  	set curframe2 ${curframe1}.stmfilename
 	lappend ::StimSelectionList  $curframe2

	lappend ::SimOptionsList StimFileName
#	SimOptionsEntry stmfile StimFileName $curframe2
	label ${curframe2}.stmfilelabel -text "StimulusFileName"
	pack  ${curframe2}.stmfilelabel -anchor sw -side top
	set mybut [entry ${curframe2}.stmfileentry -textvariable ::SimOptions(StimFileName) -width 15 -bg white -relief sunken -border 1 -highlightcolor green]
	pack $mybut -side left   -anchor n -side bottom -pady 2	
    }

}

# ShowRadioStimSet 0
# lappend SimOptionsList StimulusNumber


labelframe ${curframe}.setparameter -text "Set Simulation Parameters" -padx 5 -pady 3
pack ${curframe}.setparameter -pady 5
set curframe1 ${curframe}.setparameter


# SimFlagsEntry defaultconfigfile MakeDefaultConfig $curframe1
# SimOptionsEntry2 NTrials $curframe1
# SimOptionsEntry2 NSteps $curframe1
# SimOptionsEntry2 ITNx $curframe1
# SimOptionsEntry2 ITNy $curframe1
# SimOptionsEntry2 InputStrength $curframe1
# SimOptionsEntry2 InitialWeights $curframe1
# SimOptionsEntry2 LearnRate $curframe1
# SimOptionsEntry2 FWMaxWeights $curframe1
# SimOptionsEntry2  WeightSum $curframe1
# SimFlagsEntry quadnorm QuadraticNorm $curframe1
# SimFlagsEntry loadweights LoadWeights $curframe1
# SimOptionsEntry2 ITExExWeights $curframe1
# SimOptionsEntry2 ITExExRange $curframe1




set ResultsWindowName .simresultswin

frame ${curframe}.results3 -borderwidth 1  -relief sunken
pack ${curframe}.results3
set curframe1 ${curframe}.results3
pack [checkbutton ${curframe1}.show -text "Show Simulation Results" -variable VisibleSimResults -command [list ShowHideWin  ${::ResultsWindowName} VisibleSimResults]] -side top


ShowResultsWindow $ResultsWindowName

set LayoutWindowName .simlayoutwin
pack [checkbutton ${curframe1}.show2 -text "Show Network Layout" -variable VisibleSimLayout -command [list ShowHideWin ${::LayoutWindowName} VisibleSimLayout] ] -side top
ShowLayoutWindow $LayoutWindowName $SimDataDir


set OptionsWindowName .simoptionswin

pack [checkbutton ${curframe1}.show3 -text "Show Options" -variable VisibleSimOptions -command [list ShowHideWin ${::OptionsWindowName} VisibleSimOptions] ] -side top
ShowOptionsWindow $OptionsWindowName
set SimOutputWindowName .simoutputwin

pack [checkbutton ${curframe1}.show4 -text "Show Simulation Output " -variable VisibleSimoutputWindow -command [list ShowHideOutputWin ${::SimOutputWindowName} ::VisibleSimoutputWindow] ] -side top
ShowSimoutputWindow $SimOutputWindowName
ShowHideWin ${::SimOutputWindowName} ::VisibleSimoutputWindow