123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489 |
- *Metadata
- Recording:
- Recording quality: [ good, fair, poor, good, ok, bad ]
- Comment : PRC did not work out
- Experimenter : [ Paul Pfeiffer, Paul Pfeiffer, Me, You ]
- Temperature : 34
- ElectrodeProgram : 14
- Cell:
- Cell type : [ pyramidal cell, pyramidal cell, Wang-Buzaki, unknown, I, E ]
- Location (Recording location): [ PR LII, PR LII, CMS, MS, CLS, LS, ~ ]
- Depth : 0um
- Subject:
- Species : [ Mouse, A. leptorhynchus, passive cell model, Rat, Mouse ]
- Sex : [ unknown, Male, Female, unknown ]
- Preparation: Slice
- *Control: SpectrumAnalyzer
- intrace : [ V-1, Current-1, Cooperative-Cluster-Current, Open-Channels, Stimulus-Current-1, Total-Current-1 ]
- origin : [ before end of data, before signal, after signal ]
- offset : 0ms
- duration : 1000ms
- resolution: 10Hz
- overlap : true
- window : [ Hanning, Bartlett, Blackman, Blackman-Harris, Hamming, Hanning, Parzen, Square, Welch ]
- fmax : 5000Hz
- decibel : true
- pmin : -50dB
- *Model: NeuronModels
- Spike generator:
- spikemodel: [ Wang-Buzsaki, Stimulus, Passive membrane, Morris-Lecar, Hodgkin-Huxley, Connor, Wang-Buzsaki ]
- noised : 0.005
- deltat : 0.01ms
- integrator: [ Euler, Midpoint, Runge-Kutta 4 ]
- Voltage-gated current 1 - activation only:
- gmc : 0.5
- emc : -90mV
- mvmc : -35mV
- mwmc : 10mV
- taumc: 100ms
- Voltage-gated current 2 - activation and inactivation:
- gmhc : 0
- emhc : -90mV
- mvmhc : -40mV
- mwmhc : 10mV
- taummhc: 10ms
- pmmhc : 1
- hvmhc : -40mV
- hwmhc : 10mV
- tauhmhc: 10ms
- pmhhc : 1
- *Model: Stimulus
- Input:
- gain : 1
- offset: 0muA/cm^2
- *Model: Passive membrane
- Parameter:
- R: 50MOhm
- C: 25pF
- Input:
- gain : 1
- offset: 0muA/cm^2
- *Model: Morris-Lecar
- General:
- params: [ Type I, Custom, Type I, Type II ]
- Calcium current:
- gca : 4nS
- eca : 120mV
- mvca: -1.2mV
- mkca: 18mV
- Potassium current:
- gk : 8nS
- ek : -80mV
- mvk : 12mV
- mkk : 17.4mV
- mphik: 0.067kHz
- Leak current:
- gl: 2nS
- el: -60mV
- c : 20pF
- Input:
- timescale: 2
- gain : 1
- offset : 0muA/cm^2
- *Model: Hodgkin-Huxley
- Sodium current:
- gna: 120mS/cm^2
- ena: 50mV
- Potassium current:
- gk: 36mS/cm^2
- ek: -77mV
- Leak current:
- gl : 0.3mS/cm^2
- el : -54.4mV
- c : 1muF/cm^2
- phi: 1
- Input:
- gain : 20
- offset: 0muA/cm^2
- *Model: Connor
- Sodium current:
- gna: 120mS/cm^2
- ena: 50mV
- Potassium current:
- gk: 20mS/cm^2
- ek: -77mV
- A current:
- gka: 47mS/cm^2
- eka: -80mV
- Leak current:
- gl : 0.3mS/cm^2
- el : -22mV
- c : 1muF/cm^2
- phi: 1
- Input:
- gain : 20
- offset: 0muA/cm^2
- *Model: Wang-Buzsaki
- Sodium current:
- gna: 35mS/cm^2
- ena: 55mV
- Potassium current:
- gk: 9mS/cm^2
- ek: -90mV
- Leak current:
- gl : 0.1mS/cm^2
- el : -65mV
- c : 1muF/cm^2
- phi: 5
- Input:
- gain : 5
- offset: 0muA/cm^2
- *Event Detector: Spikes-1
- Detector:
- threshold: 0.0mV
- Indicators:
- log: true
- *RePro: Pause
- duration : 1sec
- savedata : true
- plotwidth: 1sec
- *RePro: Record
- duration : 10sec
- plotwidth: 0sec
- dioout : false
- diodevice: dio-1
- dioline : 0
- *RePro: SaveTraces
- General:
- duration : 10sec
- savedata : true
- split : false
- dioout : false
- diodevice: dio-1
- dioline : 0
- Analog input traces:
- trace-V-1 : true
- trace-Current-1 : true
- trace-Cooperative-Cluster-Current: true
- trace-Open-Channels : true
- trace-Stimulus-Current-1 : true
- trace-Total-Current-1 : true
- Events:
- events-Spikes-1: true
- *RePro: SetAttenuatorGain
- outrace : V-1
- gain : 1
- interactive: true
- *RePro: SetInputGain
- intrace : [ V-1, Current-1, Cooperative-Cluster-Current, Open-Channels, Stimulus-Current-1, Total-Current-1 ]
- gainindex : 0
- interactive: false
- *RePro: SetOutput
- outtrace : [ Current-1, g, E, J, tau, Cluster size, Number of clusters, Vhalf, Initial state ]
- value : 0nA
- intensity : 1
- interactive: false
- *RePro: Spectrogram
- intrace : [ V-1, Current-1, Cooperative-Cluster-Current, Open-Channels, Stimulus-Current-1, Total-Current-1 ]
- width : 100ms
- step : 0ms
- tmax : 10s
- duration: 0s
- size : [ "1024", "64", "128", "256", "512", "1024", "2048", "4096", "8192", "16384", "32768", "65536", "131072", "262144", "524288", "1048576" ]
- overlap : true
- window : [ Hanning, Bartlett, Blackman, Blackman-Harris, Hamming, Hanning, Parzen, Square, Welch ]
- powermax: true
- fmax : 2000Hz
- pmax : 0dB
- pmin : -50dB
- *RePro: TransferFunction
- Stimulus:
- outtrace : [ Current-1, g, E, J, tau, Cluster size, Number of clusters, Vhalf, Initial state ]
- offsetbase: [ custom, current ]
- offset : 0nA
- amplitude : 0.05nA
- clip : 4
- intensity : 1
- fmin : 0Hz
- fmax : 100Hz
- duration : 10s
- pause : 1s
- repeats : 100
- Analysis:
- intrace : [ V-1, Current-1, Cooperative-Cluster-Current, Open-Channels, Stimulus-Current-1, Total-Current-1 ]
- size : [ "1024", "64", "128", "256", "512", "1024", "2048", "4096", "8192", "16384", "32768", "65536", "131072", "262144", "524288", "1048576" ]
- overlap : true
- window : [ Hanning, Bartlett, Blackman, Blackman-Harris, Hamming, Hanning, Parzen, Square, Welch ]
- plotstdevs : false
- plotcoherence: true
- plotdecibel : false
- *RePro: Wait
- absdate: false
- date : ~
- days : 0days
- time : "00:00:00.000"
- *RePro: AttenuatorCheck
- outtrace : [ Current-1, g, E, J, tau, Cluster size, Number of clusters, Vhalf, Initial state ]
- intrace : [ V-1, Current-1, Cooperative-Cluster-Current, Open-Channels, Stimulus-Current-1, Total-Current-1 ]
- duration : 1s
- type : [ attenuation, noise ]
- frequency: 100Hz
- amplitude: 1Vmax
- minlevel : 0dB
- maxlevel : 100dB
- dlevel : 1dB
- adjust : true
- *RePro: InputRangeCheck
- outtrace: [ Current-1, g, E, J, tau, Cluster size, Number of clusters, Vhalf, Initial state ]
- intrace : [ V-1, Current-1, Cooperative-Cluster-Current, Open-Channels, Stimulus-Current-1, Total-Current-1 ]
- duration: 1000ms
- pause : 1000ms
- amplnum : 10
- *RePro: RestartDelay
- duration: 100ms
- repeats : 100
- intrace : [ V-1, Current-1, Cooperative-Cluster-Current, Open-Channels, Stimulus-Current-1, Total-Current-1 ]
- *RePro: StimulusDelay
- intrace : [ V-1, Current-1, Cooperative-Cluster-Current, Open-Channels, Stimulus-Current-1, Total-Current-1 ]
- outtrace : [ Current-1, g, E, J, tau, Cluster size, Number of clusters, Vhalf, Initial state ]
- samplerate: 20kHz
- duration : 10ms
- pause : 30ms
- repeats : 1000
- setdelay : [ none, minimum, mean ]
- *RePro: BridgeTest
- amplitude : -0.3nA
- duration : 200ms
- pause : 50ms
- average : 2
- skipspikes : true
- dynamicrange: true
- rate : 0.01
- plottrace : false
- *RePro: CalibrateSyncPulse
- imin : -1nA
- imax : 1nA
- istep : 0.001nA
- skipwin : 1000ms
- duration: 1000ms
- *RePro: CapacityCompensation
- amplitude : 0.5nA
- duration : 20ms
- frequency : 3000Hz
- showcycles : 8
- pause : 20ms
- average : 10
- skipspikes : true
- dynamicrange: false
- rate : 0.01
- *RePro: Iontophoresis
- durationpos : 1s
- amplitudepos : 1nA
- pausepos : 1s
- durationneg : 1s
- amplitudeneg : 1nA
- pauseneg : 1s
- fortunes : true
- fortuneperiod: 10s
- *RePro: SetLeak
- interactive : true
- preset : [ previous, zero, custom ]
- g : 0nS
- E : 0mV
- reversaltorest: true
- involtage : [ V-1, Current-1, Cooperative-Cluster-Current, Open-Channels, Stimulus-Current-1, Total-Current-1 ]
- duration : 100ms
- *RePro: SetVGate
- interactive : true
- preset : [ previous, zero, custom ]
- g : 0nS
- E : 0mV
- vmid : 0mV
- width : 0mV
- tau : 10ms
- reversaltorest: true
- involtage : [ V-1, Current-1, Cooperative-Cluster-Current, Open-Channels, Stimulus-Current-1, Total-Current-1 ]
- duration : 100ms
- *RePro: FICurve
- Stimuli:
- ibase : [ zero, DC, threshold ]
- imin : 0nA
- imax : 1nA
- istep : 0.1nA
- optimizedimin: 1000nA
- manualskip : false
- Timing:
- duration : 300ms
- delay : 100ms
- pause : 300ms
- ishuffle : [ Up, Down, AlternateInUp, AlternateInDown, AlternateOutUp, AlternateOutDown, Random, PseudoRandom ]
- shuffle : [ Up, Down, AlternateInUp, AlternateInDown, AlternateOutUp, AlternateOutDown, Random, PseudoRandom ]
- iincrement : -1
- singlerepeat: 2
- blockrepeat : 2
- repeats : 1
- Analysis:
- fmax : 100Hz
- vmax : -50mV
- numpoints : 0
- sswidth : 50ms
- ignorenoresponse: true
- diffincrement : 0
- maxratediff : 10Hz
- *RePro: FindRate
- rate : 5Hz
- ratetol : 1Hz
- startamplitudesrc: [ custom, custom, DC, threshold, previous ]
- startamplitude : 0.6nA
- amplitudestep : 0.2nA
- duration : 6000ms
- skipwin : 100ms
- *RePro: MembraneResistance
- Stimulus:
- amplitude: -0.1nA
- duration : 200ms
- pause : 600ms
- repeats : 0
- Analysis:
- skipspikes : true
- sswidth : 50ms
- nossfit : false
- plotstdev : true
- setdata : [ rest only, always, never ]
- checkoutput: Current-1
- *RePro: PhaseResettingCurve
- dcamplitudesrc: [ DC, custom, DC ]
- dcamplitude : 0.1nA
- amplitude : 0.2nA
- duration : 1ms
- nperiods : 5
- repeats : 200
- rateduration : 1000ms
- averageisis : 10test-pulses
- minsave : 10
- *RePro: SetDC
- outcurrent : Current-1
- dcamplitudesel : [ to previous value, to absolute value, to previous value, to a fraction of the threshold, relative to threshold ]
- dcamplitude : 0nA
- dcamplitudefrac: 90%
- dcamplitudedecr: 0nA
- interactive : true
- dcamplitudestep: [ "0.01", "0.001", "0.002", "0.005", "0.01", "0.02", "0.05", "0.1", "0.2", "0.5", "1" ]
- showstep : true
- duration : 20seconds
- update : 1seconds
- showstdev : true
- *RePro: Simple
- intrace : V-1
- outtrace : [ Current-1, g, E, J, tau, Cluster size, Number of clusters, Vhalf, Initial state ]
- amplitude : 0.3nA
- duration : 10ms
- stimulus : [ sine 1p, constant, ramp, sine 1p, sine 2p, zero ]
- samerate : true
- samplerate: 1kHz
- pause : 10ms
- repeats : 0
- save : false
- *RePro: SingleStimulus
- Waveform:
- waveform : [ Rectangular, From file, Const, Sine, Rectangular, Triangular, Sawup, Sawdown, Alpha, Whitenoise, OUnoise, Sweep ]
- stimfile : "2016-12-16-ab/Rectangular0.025Hz34000msr0ms0.25nA0.25.dat"
- stimampl : 0
- amplitude : 0.2nA
- freqsel : [ period, frequency, period, number of periods ]
- freq : 0.025Hz
- period : 25000ms
- numperiods : 1
- pulsesel : [ pulse duration, pulse duration, duty-cycle ]
- pulseduration: 19000ms
- dutycycle : 50%
- tau : 1000ms
- seed : 3
- startfreq : 1.00Hz
- endfreq : 100.00Hz
- cycleramp : 0ms
- duration : 1e+05ms
- ramp : 0ms
- Stimulus:
- offset : -0.2nA
- offsetbase: [ current, absolute, amplitude, current, threshold, previous ]
- samerate : true
- samplerate: 1kHz
- repeats : 1times
- pause : 1000ms
- before : 100ms
- after : 20000ms
- outtrace : [ Current-1, Current-1, g, E, J, tau, Cluster size, Number of clusters, Vhalf, Initial state ]
- Offset - search:
- userate : false
- rate : 100Hz
- ratetol : 5Hz
- offsetstep : 8nA
- searchrepeats : 2times
- silentrate : 0Hz
- maxsilent : 1
- skippause : true
- maxsearch : 1intensities
- method : [ Bisect, Bisect, Interpolate ]
- minslope : 4Hz/nA
- searchduration: 0ms
- searchpause : 0ms
- Analysis:
- skipwin : 100ms
- sigma : 10ms
- storevoltage: true
- plot : [ Firing rate, Current voltage trace, Mean voltage trace, Current and mean voltage trace, Firing rate ]
- Save stimuli:
- storemode : [ session, session, repro, custom ]
- storepath : ~
- storelevel: [ all, all, generated, noise, none ]
- *RePro: VICurve
- Stimuli:
- ibase: [ zero, DC, threshold ]
- imin : -1nA
- imax : 1nA
- istep: 0.1nA
- userm: false
- vstep: 1mV
- Timing:
- duration : 100ms
- delay : 100ms
- pause : 400ms
- ishuffle : [ Up, Down, AlternateInUp, AlternateInDown, AlternateOutUp, AlternateOutDown, Random, PseudoRandom ]
- shuffle : [ Random, Up, Down, AlternateInUp, AlternateInDown, AlternateOutUp, AlternateOutDown, Random, PseudoRandom ]
- iincrement : -2
- singlerepeat: 1
- blockrepeat : 4
- repeats : 1
- Analysis:
- vmin : -100mV
- sswidth : 50ms
- ton : 10ms
- plotstdev: true
|