mtspectrumtrigc

PURPOSE ^

Multi-taper event triggered time-frequency spectrum - continuous process

SYNOPSIS ^

function [S,f,Serr]=mtspectrumtrigc(data,E,win,params)

DESCRIPTION ^

 Multi-taper event triggered time-frequency spectrum - continuous process

 Usage:

 [S,f,Serr]=mtspectrumtrigc(data,E,win,params)
 Input: 
 Note units have to be consistent. See chronux.m for more information.
       data        (single channel) -- required
       E           (event times) -- required
       win         (in the form [winl winr] i.e window around each event
                                                 required)
                                                 Note that units here have
                                                 to be consistent with
                                                 units of Fs
       params: structure with fields tapers, pad, Fs, fpass, err, trialave
       -optional
           tapers : precalculated tapers from dpss or in the one of the following
                    forms: 
                    (1) A numeric vector [TW K] where TW is the
                        time-bandwidth product and K is the number of
                        tapers to be used (less than or equal to
                        2TW-1). 
                    (2) A numeric vector [W T p] where W is the
                        bandwidth, T is the duration of the data and p 
                        is an integer such that 2TW-p tapers are used. In
                        this form there is no default i.e. to specify
                        the bandwidth, you have to specify T and p as
                        well. Note that the units of W and T have to be
                        consistent: if W is in Hz, T must be in seconds
                        and vice versa. Note that these units must also
                        be consistent with the units of params.Fs: W can
                        be in Hz if and only if params.Fs is in Hz.
                        The default is to use form 1 with TW=3 and K=5

            pad            (padding factor for the FFT) - optional (can take values -1,0,1,2...). 
                    -1 corresponds to no padding, 0 corresponds to padding
                    to the next highest power of 2 etc.
                       e.g. For N = 500, if PAD = -1, we do not pad; if PAD = 0, we pad the FFT
                       to 512 points, if pad=1, we pad to 1024 points etc.
                       Defaults to 0.
           Fs   (sampling frequency) - optional. Default 1.
           fpass    (frequency band to be used in the calculation in the form
                                   [fmin fmax])- optional. 
                                   Default all frequencies between 0 and Fs/2
           err  (error calculation [1 p] - Theoretical error bars; [2 p] - Jackknife error bars
                                   [0 p] or 0 - no error bars) - optional. Default 0.
           trialave (average over events when 1, don't average when 0) - optional. Default 0
 Output:
       S       (triggered spectrum in form frequency x events for trialave=0 - 
               or as a function of frequency for trialave=1)
       f       (frequencies)
       Serr    (error bars) only for err(1)>=1

CROSS-REFERENCE INFORMATION ^

This function calls: This function is called by:

SOURCE CODE ^

0001 function [S,f,Serr]=mtspectrumtrigc(data,E,win,params)
0002 % Multi-taper event triggered time-frequency spectrum - continuous process
0003 %
0004 % Usage:
0005 %
0006 % [S,f,Serr]=mtspectrumtrigc(data,E,win,params)
0007 % Input:
0008 % Note units have to be consistent. See chronux.m for more information.
0009 %       data        (single channel) -- required
0010 %       E           (event times) -- required
0011 %       win         (in the form [winl winr] i.e window around each event
0012 %                                                 required)
0013 %                                                 Note that units here have
0014 %                                                 to be consistent with
0015 %                                                 units of Fs
0016 %       params: structure with fields tapers, pad, Fs, fpass, err, trialave
0017 %       -optional
0018 %           tapers : precalculated tapers from dpss or in the one of the following
0019 %                    forms:
0020 %                    (1) A numeric vector [TW K] where TW is the
0021 %                        time-bandwidth product and K is the number of
0022 %                        tapers to be used (less than or equal to
0023 %                        2TW-1).
0024 %                    (2) A numeric vector [W T p] where W is the
0025 %                        bandwidth, T is the duration of the data and p
0026 %                        is an integer such that 2TW-p tapers are used. In
0027 %                        this form there is no default i.e. to specify
0028 %                        the bandwidth, you have to specify T and p as
0029 %                        well. Note that the units of W and T have to be
0030 %                        consistent: if W is in Hz, T must be in seconds
0031 %                        and vice versa. Note that these units must also
0032 %                        be consistent with the units of params.Fs: W can
0033 %                        be in Hz if and only if params.Fs is in Hz.
0034 %                        The default is to use form 1 with TW=3 and K=5
0035 %
0036 %            pad            (padding factor for the FFT) - optional (can take values -1,0,1,2...).
0037 %                    -1 corresponds to no padding, 0 corresponds to padding
0038 %                    to the next highest power of 2 etc.
0039 %                       e.g. For N = 500, if PAD = -1, we do not pad; if PAD = 0, we pad the FFT
0040 %                       to 512 points, if pad=1, we pad to 1024 points etc.
0041 %                       Defaults to 0.
0042 %           Fs   (sampling frequency) - optional. Default 1.
0043 %           fpass    (frequency band to be used in the calculation in the form
0044 %                                   [fmin fmax])- optional.
0045 %                                   Default all frequencies between 0 and Fs/2
0046 %           err  (error calculation [1 p] - Theoretical error bars; [2 p] - Jackknife error bars
0047 %                                   [0 p] or 0 - no error bars) - optional. Default 0.
0048 %           trialave (average over events when 1, don't average when 0) - optional. Default 0
0049 % Output:
0050 %       S       (triggered spectrum in form frequency x events for trialave=0 -
0051 %               or as a function of frequency for trialave=1)
0052 %       f       (frequencies)
0053 %       Serr    (error bars) only for err(1)>=1
0054 
0055 if nargin < 3; error('Need data, events and window parameters'); end;
0056 if nargin < 4; params=[]; end;
0057 [tapers,pad,Fs,fpass,err,trialave,params]=getparams(params);
0058 clear tapers pad fpass trialave
0059 if nargout > 2 && err(1)==0; 
0060 %   Cannot compute error bars with err(1)=0. Change params and run again.
0061     error('When Serr is desired, err(1) has to be non-zero.');
0062 end;
0063 data=change_row_to_column(data);
0064 data=createdatamatc(data,E,Fs,win);
0065 if nargout==3; 
0066     [S,f,Serr]=mtspectrumc(data,params);
0067 else 
0068     [S,f]=mtspectrumc(data,params);
0069 end;

Generated on Fri 12-Aug-2011 11:36:15 by m2html © 2005