CrossSpecMatc

PURPOSE ^

Multi-taper cross-spectral matrix - another routine, allows for multiple trials and channels

SYNOPSIS ^

function [Sc,Cmat,Ctot,Cvec,Cent,f]=CrossSpecMatc(data,win,params)

DESCRIPTION ^

 Multi-taper cross-spectral matrix - another routine, allows for multiple trials and channels 
 Does not do confidence intervals. Also this routine always averages over trials - continuous process

 Usage:

 [Sc,Cmat,Ctot,Cvec,Cent,f]=CrossSpecMatc(data,win,params)
 Input: 
 Note units have to be consistent. See chronux.m for more information.
       data (in form samples x channels x trials) 
       win  (duration of non-overlapping window)
       params: structure with fields tapers, pad, Fs, fpass
       - optional
           tapers : precalculated tapers from dpss or in the one of the following
                    forms: 
                   (1) A numeric vector [TW K] where TW is the
                       time-bandwidth product and K is the number of
                       tapers to be used (less than or equal to
                       2TW-1). 
                   (2) A numeric vector [W T p] where W is the
                       bandwidth, T is the duration of the data and p 
                       is an integer such that 2TW-p tapers are used. In
                       this form there is no default i.e. to specify
                       the bandwidth, you have to specify T and p as
                       well. Note that the units of W and T have to be
                       consistent: if W is in Hz, T must be in seconds
                       and vice versa. Note that these units must also
                       be consistent with the units of params.Fs: W can
                       be in Hz if and only if params.Fs is in Hz.
                       The default is to use form 1 with TW=3 and K=5

            pad            (padding factor for the FFT) - optional. Defaults to 0.  
                       e.g. For N = 500, if PAD = 0, we pad the FFT 
                       to 512 points; if PAD = 2, we pad the FFT
                       to 2048 points, etc.
           Fs   (sampling frequency) - optional. Default 1.
           fpass    (frequency band to be used in the calculation in the form
                                   [fmin fmax])- optional. 
                                   Default all frequencies between 0 and Fs/2
 Output:
       Sc (cross spectral matrix frequency x channels x channels)
       Cmat Coherence matrix frequency x channels x channels
       Ctot Total coherence: SV(1)^2/sum(SV^2) (frequency)
       Cvec leading Eigenvector (frequency x channels)
       Cent A different measure of total coherence: GM/AM of SV^2s
       f (frequencies)

CROSS-REFERENCE INFORMATION ^

This function calls: This function is called by:

SOURCE CODE ^

0001 function [Sc,Cmat,Ctot,Cvec,Cent,f]=CrossSpecMatc(data,win,params)
0002 % Multi-taper cross-spectral matrix - another routine, allows for multiple trials and channels
0003 % Does not do confidence intervals. Also this routine always averages over trials - continuous process
0004 %
0005 % Usage:
0006 %
0007 % [Sc,Cmat,Ctot,Cvec,Cent,f]=CrossSpecMatc(data,win,params)
0008 % Input:
0009 % Note units have to be consistent. See chronux.m for more information.
0010 %       data (in form samples x channels x trials)
0011 %       win  (duration of non-overlapping window)
0012 %       params: structure with fields tapers, pad, Fs, fpass
0013 %       - optional
0014 %           tapers : precalculated tapers from dpss or in the one of the following
0015 %                    forms:
0016 %                   (1) A numeric vector [TW K] where TW is the
0017 %                       time-bandwidth product and K is the number of
0018 %                       tapers to be used (less than or equal to
0019 %                       2TW-1).
0020 %                   (2) A numeric vector [W T p] where W is the
0021 %                       bandwidth, T is the duration of the data and p
0022 %                       is an integer such that 2TW-p tapers are used. In
0023 %                       this form there is no default i.e. to specify
0024 %                       the bandwidth, you have to specify T and p as
0025 %                       well. Note that the units of W and T have to be
0026 %                       consistent: if W is in Hz, T must be in seconds
0027 %                       and vice versa. Note that these units must also
0028 %                       be consistent with the units of params.Fs: W can
0029 %                       be in Hz if and only if params.Fs is in Hz.
0030 %                       The default is to use form 1 with TW=3 and K=5
0031 %
0032 %            pad            (padding factor for the FFT) - optional. Defaults to 0.
0033 %                       e.g. For N = 500, if PAD = 0, we pad the FFT
0034 %                       to 512 points; if PAD = 2, we pad the FFT
0035 %                       to 2048 points, etc.
0036 %           Fs   (sampling frequency) - optional. Default 1.
0037 %           fpass    (frequency band to be used in the calculation in the form
0038 %                                   [fmin fmax])- optional.
0039 %                                   Default all frequencies between 0 and Fs/2
0040 % Output:
0041 %       Sc (cross spectral matrix frequency x channels x channels)
0042 %       Cmat Coherence matrix frequency x channels x channels
0043 %       Ctot Total coherence: SV(1)^2/sum(SV^2) (frequency)
0044 %       Cvec leading Eigenvector (frequency x channels)
0045 %       Cent A different measure of total coherence: GM/AM of SV^2s
0046 %       f (frequencies)
0047 d=ndims(data);
0048 if d<2, error('Need multidimensional array'); end
0049 if d==2, [N,C]=size(data); end;
0050 if d==3, [N,C,Ntr]=size(data); end; 
0051 if nargin < 3; params=[]; end;
0052 [tapers,pad,Fs,fpass,err,trialave,params]=getparams(params);
0053 clear err trialave params
0054 nwin=round(win*Fs); nfft=max(2^(nextpow2(nwin)+pad),nwin); 
0055 [f,findx]=getfgrid(Fs,nfft,fpass); 
0056 tapers=dpsschk(tapers,nwin,Fs); % check tapers
0057 Sc=zeros(length(findx),C,C);
0058 
0059 Nwins=floor(N/nwin);
0060 
0061 if d==3, % If there are multiple trials
0062 for iwin=1:Nwins,
0063     for i=1:Ntr, 
0064         data1=squeeze(data(1+(iwin-1)*nwin:iwin*nwin,:,i));
0065         J1=mtfftc(detrend(data1),tapers,nfft,Fs);
0066         J1=J1(findx,:,:);
0067         for k=1:C,
0068             for l=1:C,
0069                 spec=squeeze(mean(conj(J1(:,:,k)).*J1(:,:,l),2)); 
0070             Sc(:,k,l)=Sc(:,k,l)+spec;
0071             end
0072         end
0073     end
0074 end
0075 Sc=Sc/(Nwins*Ntr);
0076 end
0077 
0078 if d==2, % only one trial
0079 for iwin=1:Nwins,
0080         data1=squeeze(data(1+(iwin-1)*nwin:iwin*nwin,:));
0081         J1=mtfftc(data1,tapers,nfft,Fs);
0082         J1=J1(findx,:,:);
0083         for k=1:C,
0084             for l=1:C,
0085             Sc(:,k,l)=Sc(:,k,l)+squeeze(mean(conj(J1(:,:,k)).*J1(:,:,l),2));
0086             end
0087         end
0088 end
0089 Sc=Sc/Nwins;
0090 end
0091 
0092 Cmat=Sc;
0093 Sdiag=zeros(length(findx),C);
0094 for k=1:C,
0095     Sdiag(:,k)=squeeze(Sc(:,k,k));
0096 end
0097 
0098 for k=1:C,
0099     for l=1:C,
0100         Cmat(:,k,l)=Sc(:,k,l)./sqrt(abs(Sdiag(:,k).*Sdiag(:,l)));
0101     end
0102 end
0103 
0104 Ctot=zeros(length(findx),1); Cent=Ctot;
0105 Cvec=zeros(length(findx),C);
0106 for i=1:length(findx),
0107     [u s]=svd(squeeze(Sc(i,:,:)));s=diag(s);
0108     Ctot(i)=s(1)/sum(s); Cent(i)=exp(mean(log(s)))/mean(s);             
0109     Cvec(i,:)=transpose(u(:,1));
0110 end
0111

Generated on Fri 12-Aug-2011 11:36:15 by m2html © 2005