CONFIGURATION INFORMATION ========================= Path : /opt/PV6.0.1/conf/instr/spect/uxnmr.info Date : Mon Jun 26 14:39:49 2017 Release : TopSpin Acquisition Version 3.1PV beta-pl1 Installed in : /opt/PV6.0.1 Host : Bruker94 OS : CentOS release 5.10 (Final) CPU : Intel(R) Xeon(R) CPU E5-1620 v2 @ 3.70GHz (8 cores at 1200 MHz with Hyperthreading) User : mpiuser (mpiuser) Description : BioSpec 94/20 Location : MPI Koeln System : Avance III NMR spectrometer 1H-frequency : 400.32 MHz Order Number : 10040636 Configured in: /opt/PV6.0.1/conf/instr/spect IPSO: connected to spectrometer subnet - TCP/IP address = 149.236.99.247 - IPSO type: 19" - Tctrl : 1 - Fctrls: 2 - Gctrl1: with digital preemphasis - Rctrl : none - FREDs : none - DPP : 1 DRU: AQS DRU-E Z102520/02560 ECL 06.01 - TCP/IP address = 149.236.99.89 - Firmware Version = 151014 - DRU controls AQS-Rack and HPPR/2 DRU: AQS DRU-E Z102520/01802 ECL 06.01 - TCP/IP address = 149.236.99.88 - Firmware Version = 151014 DRU: AQS DRU-E Z102520/02462 ECL 06.01 - TCP/IP address = 149.236.99.87 - Firmware Version = 151014 - DRU controls AQS-Rack and HPPR/2 DRU: AQS DRU-E Z102520/02219 ECL 06.01 - TCP/IP address = 149.236.99.86 - Firmware Version = 151014 DRU: AQS DRU-E Z102520/02601 ECL 06.02 - TCP/IP address = 149.236.99.85 - Firmware Version = 151014 DRU: AQS DRU-E Z102520/02565 ECL 06.01 - TCP/IP address = 149.236.99.84 - Firmware Version = 151014 DRU: AQS DRU-E Z102520/02602 ECL 06.02 - TCP/IP address = 149.236.99.83 - Firmware Version = 151014 DRU: AQS DRU-E Z102520/00326 ECL 05.00 - TCP/IP address = 149.236.99.82 - Firmware Version = 151014 AQS: connected to 149.236.99.89:/dev/tty10 _Slot_ SBSB _____________________Board_____________________ Number Addr Type HW-VS FW-VS ID ECL Name Description ----------------------------------------------------------- 2 0x10 0x72 0x4 AV R 5.1 REC-1 AQS RXAD400 Z102116/2423 ECL 05.01 3 0x34 0x2 0x1 X 5.3 REF-1 REF-400 Reference Board for AQS Receiver 4 0x24 0x11 0x8 AD S 2.7 SGU-1 AQS SGU/2 400 Z103080/03092 ECL 02.07 FPGA-Vs=AF 6 0x11 0x72 0x4 AV R 5.1 REC-2 AQS RXAD400 Z102116/2424 ECL 05.01 7 0x25 0x11 0x8 AD S 2.7 SGU-2 AQS SGU/2 400 Z103080/03093 ECL 02.07 FPGA-Vs=AF 10 0x1d 0xcb 0 -- N 1.0 PUL-1 AQS PULSE SPLITTER Z104431/00172 ECL 01.00 21 0x21 0xcf 0 P 1.0 PSD-1 PSD/3 Power Supply Distribution Board -- 0x20 0xd1 0 B 3.2 MASTER AQS/3 Chassis 1 0x20 0x7 0 B MASTER AQS Rack Master AQS2M-1: connected to 149.236.99.87:/dev/tty10 _Slot_ SBSB _____________________Board_____________________ Number Addr Type HW-VS FW-VS ID ECL Name Description ----------------------------------------------------------- 2 0x10 0x72 0x4 AV R 5.1 REC-3 AQS RXAD400 Z102116/2425 ECL 05.01 4 0x11 0x72 0x4 AV R 5.1 REC-4 AQS RXAD400 Z102116/2426 ECL 05.01 6 0x12 0x72 0x4 AV R 5.1 REC-5 AQS RXAD400 Z102116/2463 ECL 05.01 8 0x13 0x72 0x4 AV R 5.1 REC-6 AQS RXAD400 Z102116/2461 ECL 05.01 10 0x14 0x72 0x4 AV R 5.1 REC-7 AQS RXAD400 Z102116/2462 ECL 05.01 12 0x15 0x72 0x4 AV R 5.1 REC-8 AQS RXAD400 Z102116/2460 ECL 05.01 16 0x1c 0xca 0x1 -- M 2.0 RFS-1 AQS RF SPLITTER Z104432/00179 ECL 02.00 -- 0x20 0xce 0 B 3.2 AQS/2-M AQS/2M Chassis 1 0x20 0x7 0 B MASTER AQS Rack Master Router: none installed Transmitters at the spectrometer subnet: ---------------------------------------- BLA_W1345501_0229 W1345501/0229 ECL 1: - TCP/IP address = 149.236.99.245 - Firmware VS = 20100510 - Amplifier = BLA1000 IE 15-400MHZ: W1345501/0229 ECL 1 - Controller = BLA CONTROL BOARD 6 2CH: W1522050/5833 ECL 50 BLA_W1345524_0014 W1345524/0014 ECL 0: - TCP/IP address = 149.236.99.244 - Firmware VS = 20100510 - Amplifier = BLA1000 IE 15-400MHZ INR: W1345524/0014 ECL 0 - Router = BLMMR31 RF AMPLIFIER MODULE: W1345212/1486 ECL 0 - Controller = BLA CONTROL BOARD 6 2CH: W1522050/5547 ECL 50 Gradient amplifiers at the spectrometer subnet: ---------------------------------------------- BGA1: BGAU_W115818_0189 - TCP/IP address = 149.236.99.246 - Firmware version = 20130604 - Web version = 5.1 - Current limits = 0.0/X, 0.0/Y, 0.0/Z (in A) - Type: TOSI - absolute lockshift frequency = changed from 10485760 Hz to 11452018 Hz Hz HDIs at the spectrometer subnet: ------------------------------------------ HDI 1: HDI_H14176_0184 - TCP/IP address = 149.236.99.242 Preamplifiers : HPPR: - HPPR/2 preamplifier connected to 149.236.99.89:/dev/tty10 Type : HPPR/2 Controller: Application firmware = AP 15 LEDs for tuning, 15 LEDs for matching Module 1 : HPLNA BB31P (reflection meter) PN=Z111091, SN=00015 from 20110811 Module 2 : HPLNA 19F1H (virtual 50 Ohm reference: 100.2%/0.1deg, reflection meter) PN=Z103203, SN=00113 from 20110926 Module 3 : HPLNA 19F1H (virtual 50 Ohm reference: 99.7%/0.1deg, reflection meter) PN=Z103203, SN=00112 from 20110926 Module 4 : HPLNA 19F1H (virtual 50 Ohm reference: 99.8%/0.1deg, reflection meter) PN=Z103203, SN=00111 from 20110924 Module 5 : HPLNA 19F1H (virtual 50 Ohm reference: 99.9%/0.1deg, reflection meter) PN=Z103203, SN=00110 from 20110926 Module 6 : ADM Function Module Frequency generation: - F1: for SGU - F2: for SGU Gradient Power Supply Control Unit: device connected to 149.236.99.247:/dev/tty04 RF cable connections (detected by 'confamp') -------------------------------------------------------------------- SGU1 NORM output -> input 1 of transmitter 2 (BLA1000 IE 15-400MHZ INR W1345524/0014 at TCP/IP 149.236.99.244) SGU1 AUX output -> open SGU2 NORM output -> input 1 of transmitter 1 (BLA1000 IE 15-400MHZ W1345501/0229 at TCP/IP 149.236.99.245) SGU2 AUX output -> input 2 of transmitter 2 (BLA1000 IE 15-400MHZ INR W1345524/0014 at TCP/IP 149.236.99.244) Blanking cable connections (detected by 'confamp') -------------------------------------------------------------------- transmitter 1 (BLA1000 IE 15-400MHZ W1345501/0229 at TCP/IP 149.236.99.245) amplifier B-1000W uses blanking 2 transmitter 1 (BLA1000 IE 15-400MHZ W1345501/0229 at TCP/IP 149.236.99.245) amplifier B-300W uses blanking 2 transmitter 2 (BLA1000 IE 15-400MHZ INR W1345524/0014 at TCP/IP 149.236.99.244) amplifier B-1000W uses blanking 1 transmitter 2 (BLA1000 IE 15-400MHZ INR W1345524/0014 at TCP/IP 149.236.99.244) amplifier B-300W uses blanking 1 LO cable connections (detected by 'confrecsel') -------------------------------------------------------------------- SGU1 -> Rf-Splitter input 1 (-> REC1) SGU2 -> Rf-Splitter input 2 (-> REC1-8) Preamplifier connections (probably wrong due to failed 'confrecpre') -------------------------------------------------------------------- Tune-SGU1 -> HPLNA BB31P -> REC1 Tune-SGU1 -> HPLNA 19F1H -> REC1 Tune-SGU1 -> HPLNA 19F1H -> REC2 Tune-SGU1 -> HPLNA 19F1H -> REC2 Tune-SGU1 -> HPLNA 19F1H -> REC2