http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
1.0
Lyuba Zehl
2014-04-01
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the Cerebus^TM data acquisition system
Owner of the device
-
string
Owner
Manufacturer of the device
Blackrock Micorsystems
string
Manufacturer
Location of the device
-
string
Location
User manual URL of the device
-
url
UserManual
Cerebus
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information of the Cerebus^TM neural signal processor (NSP)
Type of the device
Real-time
string
Type
Model of the device
-
string
Model
NeuralSignalProcessor
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on analog inputs and outputs of the device
Connector port type
BNC
string
PortType
Total number of input channels
16
int
InChannelCount
Number of input channels used
-1
int
InUsedChannelCount
IDs of AC coupled input channels
1
int
2
int
3
int
4
int
5
int
6
int
7
int
8
int
InACChannel
IDs of DC coupled input channels
9
int
10
int
11
int
12
int
13
int
14
int
15
int
16
int
InDCChannel
Devices from which inputs are received
-
string
InFrom
File in which input data are saved
-
string
InSavedIn
Total number of output channels
4
int
OutChannelCount
Number of output channels used
-1
int
OutUsedChannelCount
Target device of each output
-
string
OutTo
File in which output data are saved
-
string
OutSavedIn
AnalogIO
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the analog-to-digital converter
Voltage range of analog input
-5.0
V
float
5.0
V
float
AIRange
Maximum impedance of analog input
100.0
???
float
MaxAIImpedance
Resolution of AD converter
0.15
mV/bit
float
Resolution
Width of digital data in bits
16
bit
int
DataBits
Sampling rate of data
-1
samples/sec
int
SamplingRate
ADConverter
setup/daq
setup/daq
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on neural signal inputs and outputs of the device
Digital port type
Fiber-optic link
string
PortType
Total number of input channels
128
int
InChannelCount
Number of input channels used
-1
int
InUsedChannelCount
Devices from which inputs are received
NeuralSignalAmplifier
string
InFrom
File in which input data are saved
-
string
InSavedIn
NeuralSignalIO
setup/daq
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on digital inputs and outputs of the device
Possible digital input and output (DIO) ports
ExpI
string
ExpO
string
SerialI
string
SerialO
string
ExtSync
string
NSPSync
string
DIOPorts
Used digital input and output (DIO) ports
-
string
DIOUsedPorts
DigitalIO
setup/daq
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on inputs and outputs of the spike detection
Used method to define a data threshold for the spike detection
-
string
ThresholdType
File in which input data are saved
nev
string
SavedIn
SpikeIO
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the filter settings
Used filter type
butterworth
string
Type
States if the used filter is causal
True
boolean
Causal
High pass frequency used
-1.0
Hz
float
HighPassFreq
Low pass frequency used
-1.0
Hz
float
LowPassFreq
High pass order used
-1
int
HighPassOrder
Low pass order used
-1
int
LowPassOrder
Filter
setup/daq
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the recorded spike waveforms of the spike detection
Waveform window width
1.6
ms
float
Width
Sampling rate of data
30000
samples/sec
int
SamplingRate
Number of samples before waveform passes threshold
10
samples
int
PreThresholdSamples
Waveforms
setup/daq
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the recorded spike events of the spike detection
Sampling rate of data
30000
samples/sec
int
SamplingRate
Possible unit ID range of online sorted spike events on each channel
1
int
16
int
PreSortedUnitIDRange
Unit ID of unclassified spike events on each channel
0
int
UnclassifiedUnitID
Events
setup/daq
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on rejected recorded spike events of the spike detection
Amplitude limits of spike waveforms used to reject spike events
-1.0
mV
float
AmplitudeLimits
Minimum number of channels with a synchronously detected spike events used to reject these spike
events
-1
int
SyncChannelLimit
Number of samples for which spike detection is turned off after a rejected synchronous spike
event
-1.0
samples
float
SyncChannelRefPeriod
Unit ID reserved for rejected spike events on each channel
255
int
UnitID
Rejections
setup/daq
setup/daq
setup/daq/hardware
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the Cerebus^TM neural signal amplifier (NSA)
Type of amplifier
Front-End Amplifier
string
Type
Model of amplifier
-
string
Model
Total number of analog input channels
128
int
AIChannelCount
Number of analog input channels used
-1
int
AIUsedChannelCount
NeuralSignalAmplifier
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the analog-to-digital converter
Voltage range of analog input
-8.192
mV
float
8.192
mV
float
AIRange
Maximum impedance of analog input
-1.0
G???
float
MaxAIImpedance
Resolution of AD converter
0.25
??V/bit
float
Resolution
Width of digital data in bits
16
bit
int
DataBits
Sampling rate of data
-1
samples/sec
int
SamplingRate
ADConverter
setup/daq
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the filter settings
Filter type used
butterworth
string
Type
States if the used filter is causal
True
boolean
Causal
High pass frequency used
0.3
Hz
float
HighPassFreq
Low pass frequency used
7.5
kHz
float
LowPassFreq
High pass order used
1
int
HighPassOrder
Low pass order used
3
int
LowPassOrder
Filter
setup/daq
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the amplifier
Gain used
-1
int
Gain
Amplifier
setup/daq
setup/daq/hardware
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the Cerebus^TM neural signal stimulator (NSS)
NeuralSignalStimulator
setup/daq/hardware
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the Cerebus^TM control computer
CPU model
-
string
CPU
Amount of RAM
-1.0
GB
float
RAM
Mainboard type
-
string
Mainboard
Disk capacity of data storage
-1.0
GB
float
HarddiskCapacity
Type of operating system
-
string
OSType
Version of operating system
-
string
OSVersion
ControlComputer
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the control software of the Cerebus^TM system
ControlSoftware
setup/daq
setup/daq/software
setup/daq
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the Blackrock Utah Electrode Array
Owner of the device
-
string
Owner
Serial number of the device
-
string
SerialNo
Manufacturer of the device
Blackrock Microsystems
string
Manufacturer
Material of wires connecting array and connector
Pt/Au
string
WiresMaterial
Diameter of each wire
25.0
??m
float
WiresDiameter
Length of each wire
-1.0
mm
float
WiresLength
UtahArray
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the used connector
Style of the connector
-
string
Style
Height of the connector
-1.0
mm
float
Height
Diameter of the base of the connector
-1.0
mm
float
DiameterBase
Diameter of the body of the connector
-1.0
mm
float
DiameterBody
Width of the connector
-1.0
mm
float
Width
Length of the connector
-1.0
mm
float
Length
Type of implantation
-
string
ImplantType
Type of mounting to the skull
-
string
SkullMount
Connector
setup/daq/hardware
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the array used
Number of array grids
0
int
GridNo
Number of reference wires
2
int
NoReferences
Number of ground wires
1
int
NoGrounds
Array
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on array grid
Grid ID
-1
int
ID
Geometry of the electrode lengths
-
string
ElectrodeGeometry
Electrode site metal option
-
string
ElectrodeMetal
Inter-electrode-distance
-1.0
??m
float
ElectrodePitch
Insulation material
Parylene-C
string
Insulation
Number of electrode rows.
-1
int
GridRows
Number of electrode columns
-1
int
GridColumns
Width of array grid
-1.0
mm
float
GridWidth
Length of array grid
-1.0
mm
float
GridLength
Total number of electrodes
-1
int
ElectrodeCount
Number of connected/active electrodes
0
int
ActiveElectrodeCount
Grid_XX
setup/daq/hardware
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on array electrodes
Total number of electrodes
-1
int
ElectrodeCount
Number of connected/active electrodes
-1
int
ActiveElectrodeCount
Electrodes
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on electrode
Electrode ID
-1
int
ID
Grid ID
-1
int
GridID
Bank ID
-1
int
BankID
Pin ID
-1
int
PinID
Connector aligned ID
-1
int
IDca
Pre-implantation impedance
-1.0
k???
float
Impedance
Auto impedance during implantation
-1.0
k???
float
AutoImpedance
Length
-1.0
mm
float
Length
IDs of single units
-1
int
SUAIDs
IDs of multi units
0
int
MUAIDs
IDs for rejected units
255
int
NoiseIDs
Threshold used for spike detection
-1.0
mV
float
SpikeThreshold
Electrode_XXX
setup/daq/hardware
setup/daq/hardware
setup/daq/hardware
setup/daq/hardware
http://portal.g-node.org/odml/terminologies/v1.0/terminologies.xml
Information on the headstage used
Model of device
-
string
Model
Gain used
-1
int
Gain
Devices from which inputs are received
UtahArray
string
InFrom
Target device of each output
NeuralSignalAmplifier
string
OutTo
Headstage
setup/daq/hardware